prestosoft  - Activators Patch

by PrestoSoft LLC v 11.0.1.15 - SUMo reports Update available (12.0.0.6) Yes, Free and PRO are the same binary (just change by activation code for. PrestoSoft, ExamDiff, 1.6, Windows XP/Vista/7/8 Tuner, Tuner Internet Update Application, Windows. Two Pilots, PDF2Text Pilot, Windows. Windows 2008 activation using autounattended.xml ExamDiff Pro Appswitch.dat entries update FLAG1=HKCU\Software\PrestoSoft\ExamDiff Pro\Settings.

Prestosoft - Activators Patch -

HOW TO SPEED ​​UP MOZILLA FIREFOX

Teaching at one of the Triamudomsuksa School’s in Thailand…. am I a failure?

Well the day has finally arrived and the results of management’s assessment decision about whether or not to continue employing me has arrived. My name is not on the list that is ungraciously stuck to the notice board on a wall. Not one Thai teaching officer or any one from management discussed anything with me and no one actually did a classroom observation of my teaching methods, classroom management or saw my many students laughing and enjoying my lessons this whole year….yes… 1 year…. Oh if you ask them they will deny and bullshit with the best of them, this is what they are really good at, and please don’t get me started about all the promises they made to me and how many they actually kept!

Yes, I am hurting inside mainly because I truly cared for the students, many of the teacher’s I never really got to know because of their lack of English abilities……which brings me to my next gripe.

How can Thai teachers who fail their core subject examination which the Thai ministry of education administers, be allowed to continue teaching their subjects to students? This was a whole department including the manager! (English Department)

Surely they must be qualified at the correct level of education so they are capable of teaching it correctly, after all we foreign teachers must now complete a teaching license and do a Thai cultural course just to satisfy the Thai ministry of education’s criteria… I guess one rule for us and one rule for them springs to mind.

At this particular school we have teachers without the correct level or ability or even foreign teachers who do not have degrees, and the school was notified about this but continues to use them saying that they have verified the foreigner’s qualifications. It is all bullshit!… I know because one foreign teacher told me before he left that his qualification was fake and bought from a paper mill in Bangkok, Thailand.

I apologize for the profanity, but I see the corruption and the deceit from the management in this school and know that I can do nothing against this regime, they are powerful and have pushed me out as well as other valuable teachers whose main concern are the students, after all, they are the future of Thailand! …or aren’t they?

  • Teachers have taken scholarship money away from students who have won competitions and are unable to speak out about this atrocity.
  • Students actually sign away their rights to the money which the government provides for their education.
  • Money used on a building which was inferior due to cheap building materials and collapsed, (Thankfully during the night and no one hurt). I have photographic evidence of this and I reported this to one of the management officers.
  • A teacher with inadequate understanding of English wrote a “Health Education” examination for the Mini English Program that was over 90% incorrect and this examination’s content was never checked by any of the native speakers. Native speaking teachers were shown this examination and upon seeing the amount of errors contained in it told me that the examination should be stopped. I highlighted many of the mistakes and took this examination to my boss who is responsible for the MEP program and has a PhD said, (quote “Do not stop the exam, students must do exam”-end quote) I could not help the students who asked me during this examination what everything meant…..yes, it was that bad and yes, I do have an example of this examination which by the way is also signed by the Director of the school which shows the lack of concern with anything to do about English, it seems that no one wants to take the time to read it or organize someone to make sure there are no mistakes.(Very slap dash to say the least!).
  • A new Vice director who is second in charge of this school spends their time basically patrolling the school like a security guard. Is not allowed to know any accounting or budget requirements about the school. When this Vice director tries to make a positive suggestion for improving the school, the management humiliates them.
  • This person even informed the other members on the management team that they were not doing their jobs correctly due to errors, this Vice director is now shunned by the management at this school and their job has become a living hell for them….they too do not have a voice or a say and they just sign documents and not to even read them!!! Shocking!….absolutely disgusting in my opinion.
  • This same Vice director is not informed about some of the school activities and made to look like a very unprofessional idiot by this management.
  • This is also true about the foreign teachers who are also not informed about activities and expected to read the Thai teachers minds to find out anything.

I intend to keep adding to this list as more information comes to light and I will also be allowing comments from teachers and students from this school and from the public, please be reminded that the content that will appear on this web blog/website is not all my work or thoughts and some of the comments if derogatory or inflammatory are associated with the entity that has written them. I will do my best to moderate the people who post and leave their comments as I do not want to offend anyone or imply anything that is not true. If I have evidence and documents substantiating mine or other party’s comments then these will be available to the public or anyone from the Thai ministry of Education should they want to take formal action on the management at this school.

Hopefully someone from the ministry of education in Thailand will comment and want to know more about the many statements and other people’s comments, it’s about time these managers should be held accountable and criminal proceedings to take place if found guilty. It only takes one person to make a stand. Never forget that there is power in numbers, the more of you that complain and say something it will eventually be heard.

It is time that the students had a voice and a real say in their own education, after all everyone has a voice and it’s against the law to prevent us from telling the truth!

This school’s director even stopped the students from telling the truth on its website forum when he read comments from students complaining about teachers behavior and teaching methods. Why could he not talk to everyone concerned perhaps he decided that it was too much effort, or just doesn’t care?

Needless to say this is one of the main problems at the school, lack of communication.

I have just been informed by an English native speaking teacher that we have a meeting at 3pm today 22/02/2011. If he never spoke to me I would have never known about it, I guess lack of communication still persists. Not even my boss has had the decency to speak to me for a whole semester when she speaks to the MEP students and walks right past my glass cage you call a room! She also insists that she is sincere and wants all her teachers to be the same as her! God forbid!

Update about the meeting…….it was all bullshit again…….but this time I actually did something….. I recorded some of it…….I am really pleased too…….because I have actually got my boss……a vice director actually discussing with the other Thai teachers in Thai about a student and his family and it is very bad indeed. I have made copies and I decided this time to take some action as this is a student that has learning difficulties and no one cares about it. I have let the parents listen to this recording and they were so embarrassed, shocked more like it….I told them please try to put your child into another school, no one cares about him like I do.

Result: They listened to me and this student will now be in a better learning environment.

This is my bitch for today……..actually, for the semester.

Like this:

LikeLoading...

Posted inThe bitching page

ExamDiff Pro Master Edition 11.0.1.8 Cracked Latest Activation

ExamDiff Pro Master Edition 11.0.1.8 Free Patch Cracked

ExamDiff Pro Master Edition 11.0.1.8 Cracked Latest Activation

If you have been frustrated with other comparison utilities, you will find that ExamDiff Pro offers a much more efficient and user-friendly way to compare files and folders. It compares files and directories with equal ease, and boasts one of the fastest comparison algorithms of any tool today.

Clean Master free is one of the best cleaner apps available in the market. The app comes with a variety of features, and if users want more, they can easily upgrade to the pro version. Apart from providing access in various languages, the tool improves the speed of your PC and cleans unwanted files quickly. Get data from TheTvDB.com, TheMovieDB.org, Imdb.com. ExamDiff Pro Master Edition Code. ExamDiff Pro features a double-pane view that allows for side-by-side comparisons, with customizable color-coding indicating whether each line is added, deleted, or changed. ExamDiff Pro Master Edition Crack is a handy software application that you can use to compare the contents between two files to find out if they’re identical. It features several options that can be quickly figured out.

ExamDiff Pro Master Edition 11.0.1.8 Cracked Latest Activation

ExamDiff Pro Master Edition 11.0.1.8 2019 Download Features

  • Automatically detects file changes and prompts the user to re-compare files.
  • One push re-compare function which attempts to leave the viewer's focus in the same place as before the re-compare.
  • Drag and drop support for dropping one or two files into the program's window (e.g. from windows explorer).
  • Saves the file differences in a standard unix diff file.
  • Allows the copying of text from the comparison panes via drag and drop, a hot key, or a right button pop up.

ExamDiff Pro Master Edition 11.0.1.8 2019 Download

NameSpecification
CategoryProgramming
Downloads14,031
User Rating3.8/5
DeveloperPrestoSoft: http://www.prestosoft.com/
LicenseSerial Key
LanguageMulti-language
OsWindows 98/Me/2000/XP/2003/Vista/Server 2008/7/8
Version11.0.1.8
Updated06/04/2015

ExamDiff Pro Master Edition 11.0.1.8 Crack Video Preview

Changelog for ExamDiff Pro Master Edition 11.0.1.8 Key:

  • Enhanced display of ratings
  • Added action to re
  • fetch IMDB ratings
  • Set “Disable SSL certificate verification” to true per default to avoid connection problems
  • Cleanup of changed artwork etensions
  • Show language names in UI language
  • Added more rating providers to the settings
  • Re
  • added file size to the media files table
  • Preserve epbookmark tag in episode NFOs
  • Reworked the new indicator to use less space
  • Rebuild image cache when changing data source
  • Writing/cleanup of downloaded subtitle files

How To Crack ExamDiff Pro Master Edition 11.0.1.8 Patch:

  • First of all, take the trial version of Lightworks.
  • Install and run the program.
  • Now turn off your system security.
  • Download the crack from the link below.
  • Unzip the file and run it.
  • When done RSTART light works.
  • God
  • Don\’t worry it completely safe now you can turn o your system security.

Links for ExamDiff Pro Master Edition Crack:

ExamDiff Pro Master Edition 11.0.1.8 Cracked Latest Activation

Related

Источник: https://keyscrack.com/file-managers/examdiff-pro-master-edition-11-0-1-8-cracked-latest-activation/

Free tools for Windows sysadmin

 

– Find string if files on Windows: using findstr /s /i

– Test SSL and TLS: https://www.qualys.com/sslchecker

_Well-known online tools for network engineers: https://dnschecker.orghttps://www.whois.net/https://mxtoolbox.com/https://whatismyipaddress.com/http://ping-test.org/https://www.portcheckers.com/

– Registry editor and comparison, replace: regedt33.exe: https://sourceforge.net/projects/regedt33

– AD security: adsecurity.org  ; http://www.dsinternals.com ; http://www.pingcastle.com; https://thycotic.com/solutions/free-it-tools/weak-password-finder/

– Powershell windows forensics: https://github.com/Invoke-IR/PowerForensics  and  https://github.com/gfoss/PSRecon and https://github.com/davehull/Kans

– Memory forensics: http://www.volatilityfoundation.org/

– Crowdstrike free tools: http://www.crowdstrike.com/community-tools/index.html

– McAfee foundstone free tools: http://www.mcafee.com/us/downloads/free-tools/index.aspx

– Trousse de secours Windows sur cle USB: http://wp.me/p15Zft-wU

– Net tools and forensic tools for windows : http://www.nirsoft.net/utils/ipnetinfo.html

– System and performance: CCleaner,recuva,defragler,speccy from pirisoft: https://www.piriform.com/products

– Free Tools for hyperV: http://social.technet.microsoft.com/wiki/contents/articles/2325.hyper-v-top-free-programs.aspx

– UltraDefrag (GUI and CMD): http://ultradefrag.sourceforge.net/en/index.html

– Windows 8 or Server  2012 start menu (GUI): http://www.classicshell.net/

– New Microsoft network monitor called MESSAGE ANALYZER (GUI): http://www.microsoft.com/en-us/download/details.aspx?id=40308

– http://www.codeplex.com

– http://sourceforge.net/directory

– ESET Sysinspector: http://www.eset.com/us/download/utilities/ (is a convenient utility for the tool box of every IT expert and first responder)

– Qualys browsercheck: https://browsercheck.qualys.com/  (check internet browser vulnerabilities)

– Secunia personal inspector: http://secunia.com/vulnerability_scanning/personal/download_psi/ (scanner application’s vulnerabilities)

– TrueCrypt. Is disk encryption software: http://www.truecrypt.org/

– Keepass. To remember passwords: http://keepass.info/

– Putty, FileZilla, WinSCP, XMing (free Xserver), MobaXterm (free Xserver and SSH): Unix tools for Windows

– Remote Desktop managers: mRemoteNG, Remote Desktop manager

– Ophcrack is a free Windows password cracker based on rainbow tables: http://ophcrack.sourceforge.net/

– Anti-malware free Malwarebytes (GUI): http://www.malwarebytes.org/

– Inventory tool that performs hardware scanning, software scanning, and Active Directory (AD) reporting (GUI):  www.lansweeper.com
– DNSdataview (GUI): www.nirsoft.net/utils/dns_records_viewer.html

– WinDirStat (GUI): http://windirstat.info

– Archiving and compression 7-zip  (GUI): www.7-zip.com

– Compare content files: ExamDiff  (GUI):  www.prestosoft.com/edp_examdiff.asp

– Free File Sync (GUI): www.sourceforge.net/projects/freefilesync

– File Recovery (GUI): PC inspector File recovery   and    easeUS data recovery

– System Information for Windows and benchmarks (Gathers detailed information about a computer’s system properties, settings, and displays, benchmarks):

        – SIW  (GUI)

        – AIDA  (GUI)

        – Everest  (GUI):

– HDTune: GUI – simple disk IO utility

– Unlock DLL: GUI to unlock DLLs in use (c.f unlocker utility on internet)

– AD queries builder with powershell and powershell editor  (GUI): http://www.powergui.org

– AD reports and ldap builder (GUI): http://www.maxpowersoft.com/

– Netmork Monitoring (GUI): http://www.spiceworks.com/, or quest scriptlogic free utility called sl360

– Disk space monitor (GUI): www.tinyurl.com/zksfuw

– Bulk password reset (GUI): www.tinyurl.com/cxc3t4d

– Windows service monitor (GUI): www.tinyurl.com/dakjw32

– Vmware change reporter (GUI): www.tinyurl.com/dsdz44

– File server change reporter (GUI): www.tinyurl.com/bhd3k2b

– Password expiration notifier (GUI): www.tinyurl.com/kbwu34z

– USB blocker (GUI): www.tinyurl.com/awqc4p3

– Free disk analysis tool (Gui): www.northern-utilities.com  ; Find out how much of your storage capacity is being wasted on unwanted files

– Netbook Hardware control (GUI): www.pbus-167.com
– Sysinternal Tools (CMD/GUI): www.microsoft.com/sysinternals

 – www.joeware.net (CMD)
– www.netikus.com (CMD/GUI)
– www.solarwinds.com

– OpenSSH (Gui, Cmd: www.openssh.com )

– OpenVPN (GUI, Cmd: http://openvpn.net )
– Microsoft Security Essentials: Antivirus/Anti-malware free: www.microsoft.com/security_essentials
– Microsoft Resource Kits
– ClamAV: Antivirus
– AVast: Antivirus
– Free download manager: IE download manager
– Daemontools or Virtual Clone Drive (GUI)
– Tree size free: Directory or disk usage and statistics (GUI): http://www.jam-software.com/freeware/
– CDex: transform CD in MP3… (GUI)

– Desktop Restore. Records the position of desktop icons and restores desktop layouts.
– InfraRecorder. Burns ISO images and creates data and audio CDs and DVDs: http://infrarecorder.org/
– Notepad++. Is a text and code editor.
– NTFS Undelete. Recovers deleted files that are no longer in the recycle bin.
– Paint.NET. Manipulates images.
– PING. Makes a sector-based image copy of a disk partition.
-Windows Preinstallation Environment (WinPE). Lets you make a Windows command-line boot recovery DVD.
– XML Notepad. Is a specialized XML editor.
– ZoomIt. Magnifies portions of a screen and lets you draw on and annotate the screen (c.f www.microsoft.com/sysinternals).
– BareTail. Monitors log files in real time.
– Wireshark. Is a protocol analyzer: http://www.wireshark.org
– FileZilla. Is a GUI FTP client.

– Winscp. Is a GUI sftp client.
– Ngrep. Is a packet sniffer based on finding matching text strings.
– NeWT. Is a vulnerability scanner. (If you’re interested in obtaining this software after reading about it, go to http://cgi.tenablesecurity.com/tenable/requestForm.php.)
– OpenSSH. Creates secure, encrypted shell sessions.
– WinDump. Is a command-line packet sniffer. (If you’re interested in obtaining this software after reading about it, go to http://www.winpcap.org/windump/default.htm.)
– Winfingerprint. Is a network scanner.
– LocatePC. Emails you whenever any private or public IP address in your system changes.
– Open Computers and Software Inventory (OCS Inventory NG). Provides detailed inventory data for an entire network of computers as well as deploys packages. (If you’re interested in obtaining this software after reading about it, go to http://sourceforge.net/projects/ocsinventory.)
– PRTG Traffic Grapher. Is a network monitor.
– SyncBack. Backs up or synchronizes files to another location: http://www.2brightsparks.com/freeware/freeware-hub.html
– Wink. Builds screencast recordings. (The write-up for this tool isn’t in the main article but rather its sidebar “Screencasting with Wink”. If you’re interested in obtaining this software after reading about it, go to http://www.debugmode.com/wink.)
– CamStudio. Builds screencast recordings.
– CDBurnerXP. Burns CD-ROMs, DVDs, audio CDs, and ISO images.
– Comodo Firewall Pro. Is a firewall and antivirus application.
– DriveImage XML. Is a program for imaging and backing up partitions and logical drives.
– GParted LiveCD. Manages partitions on systems. (You can also find information about GParted in “Tool Time: Repartition Windows Servers with GParted”.)
– PageDefrag. Determines how fragmented your paging files and registry hives are, and defragments them (c.f www.microsoft.com/sysinternals)

– JkDefrag. Defragments and optimizes disks.
– TestDisk. Recovers damaged partitions, makes non-bootable disks bootable again, and repairs damaged boot sectors.

– Free Tools for hyperV: http://social.technet.microsoft.com/wiki/contents/articles/2325.hyper-v-top-free-programs.aspx

-If you work with virtual machines (VMs), check out the following 29 tools:
“Virtualization on the Cheap”
1. Catbird Compliance Enforcer. Analyzes existing virtual infrastructures, then highlights rogue VMs, quarantines suspect VMs, and generates compliance and security reports.
2. Citrix XenServer. Is a virtualization platform.
3. ConfigCheck. Evaluates an ESX Server installation to see whether it’s configured properly and in accordance with VMware’s best practices, particularly with regard to security guidelines.
4. EasyVMX. Lets you create web-based VMs.
5. Hyper-V. Is a virtualization platform.
6. Microsoft Assessment and Planning Toolkit. Searches out computers in a network, then generates a detailed inventory using Windows Management Instrumentation (WMI), SNMP, or Remote Registry Service.
7. Microsoft Virtual PC 2007. Is a virtualization platform.
8. OpsCheck. Troubleshoots configuration problems that might cause VMware VMotion to encounter problems.
9. PlateSpin Recon Inventory Edition. Profiles and analyzes data centers, then gathers information about traffic, workload, asset inventory, and application services.
10. Veeam Monitor Free Edition. Monitors VMware ESX and ESXi environments in real-time.
11. Virtual Iron Single Server Edition. Is a virtualization platform.
12. VirtualBox. Is a virtualization platform.
13. Vizioncore vOptimizer FreeWare. Squeezes Microsoft and VMware VMs into more manageable sizes.
14. VMware ESXi. Is a virtualization platform.
15. VMware Player. Loads and run VMs created by other virtualization products.
16. V-Scout. Aggregates and organizes information from up to two VMware VirtualCenter installations.
“More Free Virtualization Tools”
17. PHD Virtual.com website. Offers several free VMware utilities (e.g., VMNetBac, SnapHunter).
18. VM Explorer (VMX). Powers VMs on or off as well as backs up and restores VMs.
19. Xtravirt.com website. Offers several free virtualization utilities (e.g., GetVMwareDocs, Visio Action Pack).
“Free Virtualization Utilities”
20. ISO Recorder. Creates and burns ISO images.
21. Ultimate-P2V. Converts physical systems to VMs.
22. VHD Resizer. Expands and shrinks .vhd files.
23. VHDMount. Mounts a .vhd file as a local drive.
24. Virtual Floppy Drive. Mounts a virtual floppy drive from a VM.
25. Virtual Machine Remote Control Client Plus (VMRCplus). Manages, configures, and connects to Microsoft VMs.
26. VMDK to VHD Converter. Converts VMware images to Microsoft images.
27. VMmark. Benchmarks applications running in VMware VMs.
28. VMware Converter. Converts physical machines or Microsoft VMs to VMware VMs.
29. VMware Workstation 5.5 Disk Mount Utility. Mounts a VMware.vhd file on a Windows host.
Note that you can find more information about Hyper-V, VMware ESXi, and Citrix XenServer in “Free Hypervisors Extend Your IT Resources”.

No matter whether you write scripts or not, you’ll likely find many of the 14 tecommendations in “Script Writers’ Favorite Free Utilities” helpful:
1. Blat. A command-line utility that uses SMTP to send email or uses Network News Transfer Protocol (NNTP) to post to Usenet.
2. AutoIt v3 and SciTE Is a scripting language (AutoIt) and editor (SciTE).
3. CodeKeep Add-In. Is a code snippet manager for Visual Studio (VS).
4. DumpSec. Is a Windows security auditing program.
5. Joeware website. Offers many command-line utilities to automate AD tasks (e.g., AdQueueLoop, Unlock) and other tasks (e.g., DNSSrvRec, SidToName).
6. MD5WIN. Computes and compares Message-Digest algorithm 5 (MD5) digest strings.
7. NirSoft website. Offers numerous utilities for monitoring networks, managing passwords, retrieving Internet-related data, and performing other system-management tasks.
8. Notepad++. Is a text and code editor.
9. PSPad. Is a text and code editor.
10. Python. Is a programming/scripting language that you can use to automate tasks.
11. Regular Expression Laboratory. Lets you create regular expressions and test them against arbitrary text.
12. VIM. Is a text and code editor.
13. WinZip Command Line Support Add-On. Lets you use WinZip directly from the command line and from scripts.

14. Powershell editor and Gui powershell code builder: http://www.powergui.org

check also the powerpacks (like plug-ins for powergui, to manage other windows applications).

2013: http://www.computerworld.com/slideshow/detail/118566#slide12

Freebies that might be of interest to SharePoint administrators include the following:
“SharePoint Freebies Someone You Might Know Might Want”
1. Document Connection for Mac. Aids in accessing and browsing Mac documents in SharePoint.
2. Free Technology for Microsoft SharePoint User Groups. Is a program to provide free add-ons and other products to community-organized SharePoint user groups.
3. Persian Language Pack for Windows SharePoint Services (WSS) 3.0.
“More SharePoint Freebies Someone You Might Know Might Want”
4. Discovery Wizard for SharePoint. Gathers SharePoint inventory data and displays it in HTML reports.
5. DocAve SQL Restore Controller. Provides item-level, site-level, and site collection-level restores from active SQL Server databases and from SQL Server backups.
6. Idera SharePoint performance monitor. Monitors SharePoint performance counters and sends email alerts when problems arise.
“Free SharePoint Archiving Tool Aims to Cut Bloat”
7. Metalogix Archiving Express for SharePoint. Archives SharePoint content.

2013: http://www.infoworld.com/slideshow/111754/12-free-microsoft-exchange-tools-every-it-admin-will-love-223321#slide15

Some helpful freebies when working with Microsoft Exchange include:
“Top 10 Exchange Server 2007 Troubleshooting Tools”
1. Database Recovery Management Tool. Analyzes a database store and specifies the steps needed to mount it.
2. Database Troubleshooter. Analyzes database and transaction logs and their entries and reports on problems that might prevent you from recovering the database.
3. Dcdiag. Analyzes the state of domain controllers in a forest or enterprise and reports any problems.
4. Event Viewer. Lets you view Exchange-related events.
5. Mail Flow Troubleshooter. Identifies and repairs mail flow holdups.
6. Message Tracking. Reveals a message’s path through the Exchange Server organization when messages get lost in mail flow transit.
7. Nslookup. Helps troubleshoot DNS problems.
8. Performance Monitor. Analyzes counters associated with various aspects of system performance to see whether those counters fall within a designated range.
9. Performance Troubleshooter. Analyzes three RPC performance problems.
10. Queue Viewer. Lets you view and interact with mail flow queues.
“Two Exchange Server Tools You Should Know About”
11. Performance Analysis of Logs (PAL). Analyzes a performance monitor counter log analyzes and puts its findings in an HTML report.
12. ‘Rough and Tough’ Guide to Identifying Patterns in Transaction Logs. Provides a set of tools and associated processes for figuring out what’s happening on an Exchange server given a set of transaction log files.

If your IT duties include working with SQL Server, check out “The Mega Guide to Free SQL Server Tools”. This guide includes 80 tools, so the list is too long to print here. You can find out what those tools are at http://www.sqlmag.com/Articles/ArticleID/102244/102244.html.

At SQL Server Magazine, we’re all about helping DBAs and developers do their jobs faster and more efficiently—especially now, when they’re being expected to do more with less staff and funding. That’s why, when we realized just how many free SQL Server tools are available, we decided to bring them to your attention. You might recognize some of these tools from Kevin Kline’s Tool Time or Michael Otey’s Back Page, and many of these tools can be found on Microsoft’s CodePlex website. These tools were created by in-the-trenches DBAs and developers, as well as third-party SQL Server product vendors, to solve specific SQL Server problems or to fill holes in SQL Server’s functionality. There are so many free SQL Server tools that we couldn’t test them all, so be sure to test them yourself before running them in production.
Administration
• Data Scripter Add-in for Management Studio—This add-in lets you script data for SQL Server tables through SQL Server Management Studio (SSMS) (sqlblogcasts.com/blogs/seanprice/archive/2007/08/28/data-scripter-add-in-for-management-studio.aspx)
• Iometer—This tool measures and characterizes I/O subsystems in single and clustered servers (www.iometer.org)
• Microsoft SQL Server 2005 Upgrade Advisor—This tool analyzes your SQL Server 2000 and SQL Server 7.0 instances to find features and configuration changes that could affect an upgrade to SQL Server 2005 (www.microsoft.com/downloads/details.aspx?FamilyID=1470e86b-7e05-4322-a677-95ab44f12d75)
• mRemote—You can use this tool (which supports both RDP and VNC) to manage your remote server connections from a central GUI (www.mremote.org/wiki)
• MSSQL Blocks—This tool collects information from multiple SQL Server 2005 and 2000 instances about locked or blocked processes and stores this information in XML files for later analysis (sqlblocks.narod.ru)
• Orphan Finder—You can use Orphan Finder to find records in your SQL Server 2005 databases in which there are values in a foreign key column that aren’t in the parent table (http://www.spi.hr/EnglishaboutLC/tabid/470/Default.aspx)
• Partition Management—This tool uses the Sliding Window technique to remove data from one partition and place it into a staging table, and creates a staging table that’s used to load data into partitions (www.codeplex.com/SQLPartitionMgmt)
• Quest Software’s Toad for SQL Server Freeware—Toad for SQL Server Freeware offers a code and data editor, a data grid for modifying tables, and a database browser that lets you view and manage database objects graphically (www.toadsoft.com/toadsqlserver/toad_sqlserver.htm)
• SortSQLFilesInProject—You can use this tool to sort the SQL files contained in an SSMS project or the packages in a SQL Server Integration Services (SSIS) project (www.sqldbatips.com/showarticle.asp?ID=78)
• SQLDBSize 1.0—This tool graphically displays size information about your databases, tables, indexes, and more (www.sqldbtools.com/Tools.aspx?ProductId=3)
• SQL Management Studio Snapshot Add-In—This utility adds the Create Snapshot option to context menus in SSMS, enabling you to create a database snapshot (sqlblogcasts.com/blogs/seanprice/archive/2007/07/15/sql-management-studio-snapshot-add-in.aspx)
• SQLRecon—SQLRecon finds all of your SQL Server and Microsoft SQL Server Desktop Engine (MSDE) systems by performing active and passive scans on your network (www.specialopssecurity.com/labs/sqlrecon)
• SQL Server 2008 Extended Events Manager—This tool lets you create, delete, modify, start, and stop Extended Events sessions and metadata files in SQL Server 2008 (www.codeplex.com/ExtendedEventManager)
• SQL Server Automation Scripts—This tool provides SQL Server Agent jobs that you can use to perform automated maintenance tasks (download.microsoft.com/download/4/0/C/40CBAD9A-D990-450B-8785-F288CEBFB448/AITScripts.zip)
• SQL Server Database Copy Tool—With this utility, you can copy databases from one SQL Server system to another (dbcopytool.codeplex.com)
• SQL Server Express Utility—You can use this command-line utility to perform various SQL Server maintenance tasks (www.microsoft.com/downloads/details.aspx?FamilyID=fa87e828-173f-472e-a85c-27ed01cf6b02)
• SQL Server Health and History Tool (SQLH2) Performance Collector—This tool collects performance counter data from your SQL Server systems and stores it in a repository (www.microsoft.com/downloads/details.aspx?familyid=64983AF0-7902-427E-9B41-7C2E8FDCC140)
• SQL Server Health and History Tool (SQLH2) Reports—Prevent performance problems by using this tool to collect and store change and trending information (www.microsoft.com/downloads/details.aspx?familyid=A4B837C7-A1FA-4F25-840B-FEF15E917F18)
• YourSQLDba—You can use this T-SQL stored procedure to automate routine database maintenance tasks such as database and log backups and consistency checks (www.grics.qc.ca/YourSqlDba)
Backup and Recovery
• Idera’s SQL safe Freeware Edition—This utility lets you back up and compress multiple databases of any size and offers a scriptable interface (www.idera.com/Products/Free-Tools/SQL-safe-Freeware-Edition)
• AppAssure’s DocRetreiver Lite—This free tool lets you restore individual documents back to a SharePoint farm from a SQL Server backup (www.appassure.com/applications/free-tools/docretriever-lite-for-sharepoint/)
Best Practice and Compliance
• Best Practices Analyzer Tool for Microsoft SQL Server 2000 1.0—You can use this tool to verify whether your SQL Server 2000 systems are managed and operated according to Microsoft’s SQL Server best practices (www.microsoft.com/downloads/details.aspx?FamilyID=b352eb1f-d3ca-44ee-893e-9e07339c1f22)
• Microsoft SQL Server 2005 Assessment Configuration Pack for Sarbanes-Oxley Act (SOX)—This configuration pack audits SQL Server systems to see if they meet the SOX configuration requirements (www.microsoft.com/downloads/details.aspx?familyid=976df931-a3cf-40e3-802e-3281b1451835)
• SQL Server 2005 Best Practices Analyzer—This utility checks your databases for potential problems by using SQL Server 2005 best practices configurations (www.microsoft.com/downloads/details.aspx?FamilyId=DA0531E4-E94C-4991-82FA-F0E3FBD05E63)
• SQL Server FineBuild—FineBuild lets you install SQL Server 2008 and 2005 with one click, and provides best practice configurations as well (www.codeplex.com/SQLServerFineBuild)

 • BIDS Helper—This Visual Studio .NET add-in enhances SQL Server 2008 and 2005’s Business Intelligence Development Studio (BIDS) (www.codeplex.com/bidshelper)
• DTLoggedExec—With DTLoggedExec, each step executed by SSIS packages is logged, which makes configuring and troubleshooting SSIS packages fast and easy (dtloggedexec.codeplex.com/Release/ProjectReleases.aspx?ReleaseId=21219)
• Microsoft SQL Server 2005 Data Mining Add-ins for Microsoft Office 2007—These add-ins let you use SQL Server 2005’s predictive analysis features in Microsoft Excel 2007 and Microsoft Visio 2007 (www.microsoft.com/downloads/details.aspx?FamilyID=7c76e8df-8674-4c3b-a99b-55b17f3c4c51)
• Microsoft SQL Server Metadata-Driven ETL Management Studio (MDDE)—You can use MDDE to quickly generate SSIS packages (sqlservermddestudio.codeplex.com)
• Reporting Services Scripter—This .NET Windows Forms application offers the ability to easily move SQL Server Reporting Services (SSRS) reports and catalog item properties between multiple servers (www.sqldbatips.com/showarticle.asp?ID=62)
• RSBuild—You can use this SSRS deployment tool to execute database scripts with ADO.NET and publish reports and data sources to SSRS (rsbuild.codeplex.com)
• SQL Nexus—This front-end visualization tool is used to load and analyze performance data that was collected by SQLDiag and PSSDiag (www.codeplex.com/sqlnexus)
Change Management
• SQLDBSearch 2.0—With SQLDBSearch 2.0, you can find objects that could be affected by a soon-to-be implemented database change (www.sqldbtools.com/Tools.aspx?ProductId=2)
• Tarantino Database Change Management—This utility makes it easier to apply database schema and database changes to multiple SQL Server systems (code.google.com/p/tarantino/wiki/DatabaseChangeManagement)
Code Formatters
• ApexSQL Refactor—This SQL Server Management Studio add-in offers 43 customizable options for formatting your SQL code and lets you preview your changes before you save them (www.apexsql.com/sql_tools_refactor.asp)
• Instant SQL Formatter—This tool not only reformats your SQL code but also turns your formatted SQL code into HTML code and translates your SQL code into other coding languages such as C# and Java (www.wangz.net/gsqlparser/sqlpp/sqlformat.htm)
• Manoli C# Code Format—You can use this tool to format code to the HTML 4.01 specification for a website or blog (www.manoli.net/csharpformat)
• Simple-Talk Code Prettifier—This tool converts your ASCII source code into HTML code so that you can paste it into an online element such as a blog or website (www.simple-talk.com/prettifier/default.php)
• SQLinForm—With this SQL code formatter, SQL statements aren’t transferred over the Internet and there’s nothing to install (www.sqlinform.com)
Database Comparison
• CompareData—This utility uses ODBC drivers to compare and synchronize data between two SQL Server databases (www.zidsoft.com)

 • Open DBDiff—This database schema comparison tool provides you with a report showing the differences between two database schemas and includes a synchronization script that you can use to update the databases (www.codeplex.com/OpenDBiff)
• SQL Accord Community Edition for Microsoft SQL Server—This tool offers schema comparison features via an interactive GUI (www.sqleffects.com/Articles/Product/sqlAccordInfo/aboutSqlAccordCommunityEd.html)
• SQLDBDiff—You can use this tool to compare and synchronize SQL Server 2005 and 2000 database schemas (www.sqldbtools.com)
• TableDiff.exe GUI—With TableDiff.exe GUI, you no longer have to run the TableDiff.exe table comparison tool (found in SQL Server 2005) from the command line (weblogs.sqlteam.com/mladenp/archive/2007/08/10/60279.aspx)
Database Security
• Devenius SQL Encryption Assistant Basic Edition—You can use this SQL Server Management Studio add-in to manage your encryption keys (www.devenius.com/sql_server_tools/sql_encryption_assistant/SEA.aspx)
• Idera’s SQL permissions—You can use this tool to move or copy SQL Server login information and permissions setting between servers (www.idera.com/Products/Free-Tools/SQL-permissions)
• Lockdown.sql—Your SQL Server systems are locked down to the most secure configuration, letting you deploy systems that have only required functionality enabled (www.sqlsecurity.com/Tools/LockdownScript/tabid/64/Default.aspx)
• Microsoft Baseline Security Analyzer 2.1—This tool performs vulnerability assessment checks on your SQL Server systems to verify their security (technet.microsoft.com/en-us/security/cc184923.aspx)
• SQLPing 3.0—SQLPing scans your network to find new and unprotected SQL Server and MSDE instances (www.sqlsecurity.com/Tools/FreeTools/tabid/65/Default.aspx)
Development
• DbFit—You can use DbFit to run Framework for Integrated Testing (FIT) tests directly against databases, making it easier to perform integration testing on databases (www.fitnesse.info/dbfit)
• ScriptDB—This application scripts database objects using SQL Server Management Objects (SMO) (www.codeplex.com/ScriptDB)
• SpatialViewer—This utility lets you view spatial data easily (www.codeplex.com/SpatialViewer)
• SQL Server PowerShell Extensions (SQLPSX)—This tool helps make working with SMO from PowerShell easier by offering PowerShell functions around SMO objects (sqlpsx.codeplex.com)
• SQL Spatial Tools—SQL Spatial Tools includes two tools: Shape2SQL, which you use to upload ESRI files to SQL Server Spatial, and SQLSpatial Query Tool, which queries SQL Server 2008 and displays the geometry output via a Windows Presentation Foundation map (www.sharpgis.net/page/SQL-Server-2008-Spatial-Tools.aspx)
• SQLCLRProject—With SQLCLRProject, you can use MSBUILD tasks to deploy .NET assemblies to SQL Server 2008 and 2005 (www.codeplex.com/sqlclrproject)
• SQLIO Disk Subsystem Benchmark Tool—With this tool, you could find out what the I/O capacity of a SQL Server configuration is (www.microsoft.com/downloads/details.aspx?familyid=9a8b005b-84e4-4f24-8d65-cb53442d9e19)
• SQLScripter—This command-line utility automates schema generation and scripts SQL Server 2005 databases (www.valinor.co.il/tools-sqlscripter.asp)
• SQLsharp—This free tool offers a CLR library of useful functions that you can use to write better SQL code in SQL Server 2008/2005 (www.sqlsharp.com)
• SSMS Tools Pack—This suite of tools enhances SSMS’s functionality with features such as a query template tool and a CRUD procedure-generation tool (www.ssmstoolspack.com)
• Stored Procedure Generator—This tool generates the stored procedures necessary to access tables in SQL Server (spgen.codeplex.com)
• tsqlt—As a unit testing framework for T-SQL, tsqlt helps isolate functionality to be tested (sourceforge.net/projects/tsqlt)

Stress test tool, Heavy Load free tool from JAM software: https://www.jam-software.de

• Idera’s SQL job manager—With SQL job manager, you can view and manage SQL Server Agent jobs across multiple SQL Server systems from a central administration console (www.idera.com/Products/Free-Tools/SQL-job-manager)
• JAMS Monitor—With JAMS Monitor, you can manage Windows Task Scheduler and SQL Server jobs and ensure that they’re running successfully from a centralized management console (www.mvpsi.com/FreeMonitor.aspx)
Log Management
• Log Parser 2.2—You can use this tool to access text-based data (e.g., log files, XML files), as well as data sources in Windows (e.g., Active Directory, the event log) (www.microsoft.com/downloads/details.aspx?FamilyID=890cd06b-abf8-4c25-91b2-f8d975cf8c07)
• PSSDIAG Data Collection Utility—This diagnostic data collector can be used to gather logs and data files (www.microsoft.com/downloads/details.aspx?familyid=5564386A-28C2-4483-8293-76FFF67B9EB3)
Performance and Monitoring
• ClearTrace—You can use this graphical display tool to summarize query performance data from server-side trace and SQL Server Profiler sessions (www.cleardata.biz/cleartrace/default.aspx)
• DMVStats 1.01—You can use this tool to collect, analyze, and report on performance data from SQL Server 2005 Dynamic Management Views (DMVs) (www.codeplex.com/sqldmvstats)
• Idera’s SQL check—This tool runs as a secure screensaver and monitors your SQL Server systems, as well as offers a look at processes, error logs, and SQL Server Agent jobs (www.idera.com/Products/Free-Tools/SQL-check)

• Internals Viewer for SQL Server—You can use this tool to see how data is allocated, organized, and stored in the SQL Server storage engine (internalsviewer.codeplex.com)
• MDX Script Performance Analyser—You can use this tool to identify which statements in your SQL Server Analysis Services (SSAS) MDX script are negatively affecting MDX query performance (www.codeplex.com/mdxscriptperf)
• Performance Analysis of Logs (PAL) Tool—PAL automates the collection and analysis of performance counters in the Performance Monitor Counter log (www.codeplex.com/PAL)
• Quest Discovery Wizard for SQL Server (beta)—You can use this tool to monitor your network for changes and find all your SQL Server instances (www.quest.com/discovery-wizard-for-sql-server)
• RML Utilities for SQL Server (x86)—With this tool, you can monitor SQL Server performance by processing SQL Server trace files and viewing reports, and test how a specific change will affect your SQL Server systems (www.microsoft.com/downloads/details.aspx?FamilyId=7EDFA95A-A32F-440F-A3A8-5160C8DBE926)
• SQLIOSim—SQLIOSim replicates SQL Server’s types and patterns of I/O requests on a disk subsystem and verifies data similarly to how SQL Server would in a production environment (blogs.msdn.com/sqlserverstorageengine/archive/2006/10/06/SQLIOSim-available-for-download.aspx)
• SQLQueryStress—This tool is helpful when performance stress testing T-SQL queries because it collects data about whether your queries will run under load, and each query’s resource usage (www.datamanipulation.net/sqlquerystress)
• SQL Server 2005 Performance Dashboard Reports—These reports help you quickly identify performance bottlenecks and provide the information necessary to resolve them (www.microsoft.com/downloads/details.aspx?FamilyId=1d3a4a0d-7e0c-4730-8204-e419218c1efc)
• SQL Server Cache Manager—Find out what is being stored in the SQL Server cache and if the cache is being used efficiently with this free tool (www.codeplex.com/sqlservercache)
• SQL Server DBA Dashboard—This tool uses graphs and reports, which are integrated with SSMS, to identify what is using your SQL Server systems’ resources (www.sqlserverexamples.com/v2/Products/tabid/76/Default.aspx)
Prevent SQL Server Injection Attacks
• bsqlbf-v2—This Perl script lets you extract data from blind SQL injections (code.google.com/p/bsqlbf-v2)
• HP Scrawlr—This scanner tool crawls your web pages, checking for SQL injection vulnerabilities (www.communities.hp.com/securitysoftware/blogs/spilabs/archive/2008/06/23/finding-sql-injection-with-scrawlr.aspx)
• Microsoft Source Code Analyzer for SQL Injection—You can use this tool to find SQL injection vulnerabilities in ASP code (support.microsoft.com/kb/954476)
• URLScan—URLScan restricts the type of HTTP requests Microsoft IIS will process (learn.iis.net/page.aspx/473/using-urlscan)
Web Administration
• SQL Server Hosting Toolkit—The SQL Server Hosting Toolkit offers two tools: the Database Publishing Wizard, which you can use to upload your databases to a hosting environment, and the Database Publishing Services, which offers ASP.NET web services that can make it easier for you to deploy databases (sqlhost.codeplex.com)
• SQL Server Web Tools—This web-based administration tool lets you perform management tasks, including administering accounts, managing databases and tables, and creating and running queries and stored procedures (sqlwebtools.codeplex.com)
• SQL Web Data Administrator—This SQL Server management tool lets you create and edit databases, export and import database schema and data, and more (www.codeplex.com/SqlWebAdmin)
Who Says Nothing in Life Is Free?
Although this list includes dozens of free SQL Server tools, it doesn’t include them all. If you know about a free SQL Server utility that’s not on this list, we want to hear about it: You can email me at mkeller@sqlmag.com. Also, please share your feedback about the tools included in this list in the Tool Time forum at www.sqlmag.com/forums. For even more free tools, see the sidebars “Free SQL Server Projects and Samples” and “Free PowerShell Scripts for SQL Server.”

43.6928006.845744

11 Avenue Séverine, 06460 Saint-Vallier de thiey,France

Like this:

LikeLoading...

Related

Published by jdalbera

IT Pro: 27 years experience for large companies - Technical manager and solution architect: Directory services and Identity Managemen expert, Azure AD, Office 365, Azure infrastructures, Microsoft AD Security (ADDS,ADFS,ADCS), PowerShell, Quest solutions architect. Operating systems (Win/Lin). Unix and Microsoft interoperability. Data center Operations. Company integrations. Network architectures. Virtualization and storage infrastructures. HP/Dell servers deployments. Certifications: MCSE, MCPs, MCITS, ITIL, VCP, CCNA, CyberArk View more posts

Источник: https://itworldjd.wordpress.com/2017/10/15/free-tools-for-system-and-network-or-db-administrators/

IP Help Manual V35

Citation preview

Interactive Petrophysics

Users Manual Version 3.5 2008

Senergy Ltd. Ternan House North Deeside Road Banchory Kincardineshire AB31 5YR Scotland

Interactive Petrophysics V3.5 Interactive Petrophysics © 2008.... Senergy/PGL

DISCLAIMER REGARDING THE USE OF THIS SOFTWARE – INTERACTIVE PETROPHYSICS V3.5 YOU EXPRESSLY ACKNOWLEDGE AND AGREE THAT USE OF THIS SOFTWARE IS AT YOUR SOLE RISK. BY DOWNLOADING/INSTALLING AND/OR USING THIS SOFTWARE YOU ARE CONSIDERED TO HAVE READ THIS DISCLAIMER AND AGREED TO ITS TERMS. THIS SOFTWARE AND THE ACCOMPANYING FILES ARE SUPPLIED "AS IS" AND WITHOUT WARRANTIES AS TO PERFORMANCE OR MERCHANTABILITY OR ANY OTHER WARRANTIES WHETHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE SOFTWARE IS WITH THE END USER. IN NO EVENT SHALL THE SELLER OR ITS AGENTS OR RESELLERS BE LIABLE FOR SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES. ANY LIABILITY OF THE SELLER OR ITS AGENTS OR RESELLERS WILL BE LIMITED EXCLUSIVELY TO PRODUCT REPLACEMENT OR REFUND OF PURCHASE PRICE. No part of this product may be reproduced, transmitted or translated by any means - graphical, electronic, or mechanical - including photocopying, recording, taping or storage in an information retrieval system, without the expressed written permission of Senergy Ltd. Further copies of this document are available from Senergy Ltd on request. Although every care has been taken to ensure that the information in this software and associated documentation is accurate and up to date, software is, by its very nature, complex and changeable. Senergy Ltd and its agents or resellers therefore cannot be held responsible for any error or omission in this software and the associated documentation. The information in this software and the associated documentation is subject to change without notice.

Contents

Senergy

I

Table of Contents Foreword

0

Section 1 Introduction

2

Section 2 Disclaimer of Warranty

5

Section 3 What's New in IP Version 3.5

7

Section 4 Getting Help and Program Updates

13

Section 5 PC System Requirements

21

Section 6 User Interface and Data Entry

24

Section 7 Database Interface

40

1 New Database ................................................................................................................................... 46 2 Open Database ................................................................................................................................... 47 3 Set Default ................................................................................................................................... File Location 49 4 Explore Database ................................................................................................................................... Folder 51 5 File - Save ................................................................................................................................... Current Well As... 53 6 Save All Wells ................................................................................................................................... to Database 57 7 Auto Save ................................................................................................................................... 59 8 Printer Setup ................................................................................................................................... 60

Section 8 Database Security

62

1 Well Security ................................................................................................................................... 63

Section 9 Well Management

74

1 Load Wells ................................................................................................................................... from Database 76 2 Create New ................................................................................................................................... Well 79 3 Select Well ................................................................................................................................... to Display 80 4 Well - Save ................................................................................................................................... Current Well As... 84 5 Close Well ................................................................................................................................... 85 6 Delete Well ................................................................................................................................... 87 7 Reset Current ................................................................................................................................... Well 88 8 Manage Well ................................................................................................................................... Header Info. 89 9 History Module ................................................................................................................................... 99 ExamDiff.........................................................................................................................................................

106

10 Delete Parameter ................................................................................................................................... Sets 108 11 Plot Range ................................................................................................................................... Editor 109

Index

II

Interactive Petrophysics V3.5

Senergy

12 Take Notes ................................................................................................................................... 116

Section 10 Curve Management

119

1 Manage................................................................................................................................... Curve Sets 121 2 Manage................................................................................................................................... Curve Headers 128 3 Manage................................................................................................................................... Zones / Tops 136 4 Link Zones ................................................................................................................................... / Top Sets 158 5 Delete Curves ................................................................................................................................... 164 6 Copy Curves ................................................................................................................................... From Well 165 7 Multi-Well ................................................................................................................................... Options 167 8 Manage................................................................................................................................... Multi-Well Well Header Info. 168 9 Manage................................................................................................................................... Multi-Well Curve Sets 171 10 Manage................................................................................................................................... Multi-Well Curve Headers 176 11 Manage................................................................................................................................... Multi-Well Zones / Tops 180

182

Section 11 Data Loading

1 ASCII Load ................................................................................................................................... 184 2 LAS / LBS ................................................................................................................................... Load 194 3 LAS3 Load ................................................................................................................................... 201 4 LIS Load ................................................................................................................................... 206 5 DLIS Load ................................................................................................................................... 212 6 Schlumberger ................................................................................................................................... Tool Box 219 7 DBASE4................................................................................................................................... Load 221 8 LAS Batch ................................................................................................................................... Load 223 9 Zone Tops ................................................................................................................................... 228 10 Picture ................................................................................................................................... Curves 229 11 Text Curves ................................................................................................................................... 230 12 Interval ................................................................................................................................... Loader 231 13 Capillary ................................................................................................................................... Pressure Data Loader 237 14 Load Well ................................................................................................................................... Attributes 244 15 Real Time ................................................................................................................................... Data Link 251

262

Section 12 Data Saving

1 ASCII Write ................................................................................................................................... 263 2 LAS Write ................................................................................................................................... 267 3 LIS Write ................................................................................................................................... 271 4 DLIS Write ................................................................................................................................... 275 5 DBASE4................................................................................................................................... Write 279 6 Save Zone ................................................................................................................................... Tops 281

Section 13 Connecting to External Databases

285

1 Common ................................................................................................................................... Database Connection Tasks 297

Index

Contents

Senergy

III

2 Read/ Write ................................................................................................................................... to PETCOM DB 302 3 GEOLOG6 ................................................................................................................................... 308 4 OpenWorks ................................................................................................................................... 318 5 ODM

................................................................................................................................... 326

6 Shell LOGIC ................................................................................................................................... Database Loader 331 7 Read / Write ................................................................................................................................... via OpenSpirit 335

343

Section 14 Parameter Sets

1 Parameter ................................................................................................................................... Set Management 344 2 Save Parameter ................................................................................................................................... Set to File 351 3 Print Parameter ................................................................................................................................... Set 353 4 Delete Parameter ................................................................................................................................... Sets 354

357

Section 15 Data Editing

1 Interactive ................................................................................................................................... Curve Edit 359 2 Interactive ................................................................................................................................... Baseline Shift 363 3 Interactive ................................................................................................................................... Trend / Square Curve 367 4 Interactive ................................................................................................................................... Depth Shift 372 5 Depth Shift ................................................................................................................................... Other Curves 389 6 Interactive ................................................................................................................................... Block Depth Shift 390 7 Interactive ................................................................................................................................... Curve Splice 394 8 Splice Curves ................................................................................................................................... 398 9 Interactive ................................................................................................................................... Dip Picking 400 10 Create Curve ................................................................................................................................... / Array Curve 404 11 Create /................................................................................................................................... Edit Lithology Curve 408 12 Create /................................................................................................................................... Edit Point Curve 413 13 Curve Filter ................................................................................................................................... 415 14 Curve Average ................................................................................................................................... 417 15 Curve Rescale ................................................................................................................................... 419 16 Fill Data................................................................................................................................... Gaps 421

424

Section 16 Array Image Data

1 Curves to ................................................................................................................................... Array Data 425 2 Array Data ................................................................................................................................... to Curves 426 3 Create Acoustic ................................................................................................................................... Image 428 4 Create Electrical ................................................................................................................................... Image 430 5 Merge Images ................................................................................................................................... 439

Section 17 Picture / Core Photo Data

442

1 Edit Picture ................................................................................................................................... Curve Headers 443 2 Edit / Load ................................................................................................................................... Picture Curve Data 444

449

Section 18 Text Curves

Index

IV

Interactive Petrophysics V3.5

Senergy

1 Edit Text ................................................................................................................................... Curve Headers 450 2 Edit / Load ................................................................................................................................... Text Curve Data 451

458

Section 19 Data Viewing

1 Database ................................................................................................................................... Browser 459 2 Log Plot................................................................................................................................... Display 474 Zones ......................................................................................................................................................... Depth /Time ......................................................................................................................................................... Index Numeric......................................................................................................................................................... Variable ......................................................................................................................................................... Shading VDL Plots ......................................................................................................................................................... Tadpoles......................................................................................................................................................... Waveforms ......................................................................................................................................................... Pictures......................................................................................................................................................... Images ......................................................................................................................................................... Set Default ......................................................................................................................................................... Plot Format Dip Image ......................................................................................................................................................... Annotations ......................................................................................................................................................... Plot Output ......................................................................................................................................................... (File - Printer) Horizontal ......................................................................................................................................................... Log Plot

496 498 501 503 505 507 509 511 512 520 522 523 532 553

3 Histograms ................................................................................................................................... 558 Curve Normalization .........................................................................................................................................................

581

4 Crossplots ................................................................................................................................... 591 Areas ......................................................................................................................................................... Regression ......................................................................................................................................................... User-Defined ......................................................................................................................................................... Line 3D Crossplots ......................................................................................................................................................... Frequency ......................................................................................................................................................... Crossplots Pressure......................................................................................................................................................... Gradient Plots Standalone ......................................................................................................................................................... Pickett Plot Creating......................................................................................................................................................... Crossplot Overlay Files

616 619 626 628 629 631 642 645

5 Multi-curve ................................................................................................................................... Crossplot 648 6 3D Parameter ................................................................................................................................... Viewer 658 Well Selection ......................................................................................................................................................... Parameter ......................................................................................................................................................... Selection Define 3D ......................................................................................................................................................... View 3D Display .........................................................................................................................................................

659 661 662 664

7 Multi-Well ................................................................................................................................... Correlation Viewer 670 Multi-Well ......................................................................................................................................................... Correlation Viewer

670

8 Well Map ................................................................................................................................... 691 9 Montage................................................................................................................................... Builder 699 10 Curve Listing ................................................................................................................................... / Curve Edit 703 11 Curve Statistics ................................................................................................................................... 709 12 Multi-Well ................................................................................................................................... Curve Statistics 714 13 Curve and ................................................................................................................................... Set Names 718 14 Tool Bars ................................................................................................................................... 719

Section 20 Calculation and Correction

721

1 User Formula ................................................................................................................................... 722

Index

Contents

Senergy

V

2 Multi-Line ................................................................................................................................... User Formula 728 3 Basic Log ................................................................................................................................... Analysis Functions 739 4 Temperature ................................................................................................................................... Gradient 750 5 RW from ................................................................................................................................... SP 751 6 True Vertical ................................................................................................................................... Depth Calculations 752 7 True Vertical ................................................................................................................................... / Stratigraphic Thickness 762 8 Curves ................................................................................................................................... from Zones / Parameters 766 9 Curve Integration ................................................................................................................................... 768 10 Environmental ................................................................................................................................... Corrections 771 Schlumberger ......................................................................................................................................................... Corrections Baker Atlas ......................................................................................................................................................... Corrections Halliburton ......................................................................................................................................................... Corrections Anadrill ......................................................................................................................................................... Corrections Baker Hughes ......................................................................................................................................................... Inteq Corrections Sperry Sun ......................................................................................................................................................... Corrections Weatherford ......................................................................................................................................................... Corrections PathFinder .........................................................................................................................................................

778 781 784 786 788 790 792 794

798

Section 21 Interpretation

1 Parameter ................................................................................................................................... Set Management 799 2 Basic Log ................................................................................................................................... Analysis 806 3 Clay Volume ................................................................................................................................... 816 Clay Volume ......................................................................................................................................................... Interactive Plot Clay Volume ......................................................................................................................................................... Parameters Clay Volume ......................................................................................................................................................... Equations and Methodology

818 823 834

4 Porosity................................................................................................................................... and Water Saturation 838 Porosity......................................................................................................................................................... and Sw Interactive Plot Porosity......................................................................................................................................................... and Sw Parameters Porosity......................................................................................................................................................... and Sw Equations and Methodology

851 866 894

5 Cut-off and ................................................................................................................................... Summations 918 Cut-off and ......................................................................................................................................................... Summations Interactive Plot Printing ......................................................................................................................................................... Cut-off and Summation Results Cut-off and ......................................................................................................................................................... Summations Equations and Methodology Cut-off and ......................................................................................................................................................... Summations Parameters

924 928 932 936

6 Multi-well ................................................................................................................................... Cutoff and Summation 950 7 Auto Update ................................................................................................................................... of Analysis Modules 963 8 NMR Normalization ................................................................................................................................... 964 9 NMR Interpretation ................................................................................................................................... 968 NMR Interactive ......................................................................................................................................................... Plot NMR Equations .........................................................................................................................................................

991 995

10 Cased ................................................................................................................................... Hole 1004 TDT Stand ......................................................................................................................................................... Alone TDT Time ......................................................................................................................................................... Lapse

Section 22 Advanced Interpretation

1004 1013

1020

1 Interactive ................................................................................................................................... Mineral Solver 1022 Mineral......................................................................................................................................................... Solver Overview User Interface ......................................................................................................................................................... Interactive ......................................................................................................................................................... Plot

Index

1022 1024 1050

VI

Interactive Petrophysics V3.5

Senergy

Interactive ......................................................................................................................................................... Crossplots Save Load ......................................................................................................................................................... and Delete Models Mineral......................................................................................................................................................... Solver Calibration Combined ......................................................................................................................................................... Model Results Mineral......................................................................................................................................................... Solver Equations and Methodology

1057 1060 1061 1065 1069

2 Monte ................................................................................................................................... Carlo Error Analysis 1097 Monte Carlo ......................................................................................................................................................... Error Analysis Batch Monte ......................................................................................................................................................... Carlo

1097 1120

3 Fuzzy Logic ................................................................................................................................... Curve Prediction 1126 Equations ......................................................................................................................................................... and Methodology

1139

4 Multiple ................................................................................................................................... Linear Regression 1143 5 Neural................................................................................................................................... Networks 1150 6 Cluster................................................................................................................................... Analysis 1163 Theory ......................................................................................................................................................... of Cluster Analysis

1184

7 Principal ................................................................................................................................... Component Analysis 1189 8 Rock Physics ................................................................................................................................... 1197 Shear Sonic ......................................................................................................................................................... QC / Create Density......................................................................................................................................................... Estimation Fluid Substitution ......................................................................................................................................................... Equations .................................................................................................................................................. and Methodology Laminated ......................................................................................................................................................... Fluid Subs Operational .................................................................................................................................................. Instructions Equations .................................................................................................................................................. and Methodology Elastic ......................................................................................................................................................... Impedance

1197 1202 1203 1216 1224 1225 1239 1260

9 Pore Pressure ................................................................................................................................... Calculations 1264 Density......................................................................................................................................................... Estimation Overburden ......................................................................................................................................................... Gradient Calculation Pore & ......................................................................................................................................................... Fracture Pressure Gradient Calculations Running .................................................................................................................................................. the Model Viewing .................................................................................................................................................. Output Results Fracture .................................................................................................................................................. Gradient Models Pore Pressure .................................................................................................................................................. References Overburden .................................................................................................................................................. Gradient Curves

1267 1268 1272 1291 1297 1303 1311 1311

10 Saturation ................................................................................................................................... Height Modelling (Cap. Pressure) 1313 Capillary ......................................................................................................................................................... Pressure Set-Up Capillary ......................................................................................................................................................... Pressure Functions Saturation ......................................................................................................................................................... Versus Height Curves

1314 1337 1363

11 Saturation ................................................................................................................................... Height Modelling (Log Curves) 1374 12 Eastern ................................................................................................................................... European Resistivity Corrections 1384 EERC Interface ......................................................................................................................................................... EERC Theory .........................................................................................................................................................

1385 1393

1413

Section 23 Multi-Well

1 Multi-Well ................................................................................................................................... Parameter Distribution 1414 2 Multi-Well ................................................................................................................................... Batch Operation 1427 3 Multi-Well ................................................................................................................................... Change Parameters 1436

1443

Section 24 Tools

1 System................................................................................................................................... Defaults 1444 Edit Curve ......................................................................................................................................................... System Defaults

Index

1446

Contents

Senergy

VII

Edit Curve ......................................................................................................................................................... Types Defaults Edit Curve ......................................................................................................................................................... Alias Defaults Edit Mineral ......................................................................................................................................................... Solver Mineral System Defaults Edit Mineral ......................................................................................................................................................... Solver Mineral Equations Defaults Edit Crossplot ......................................................................................................................................................... Overlay Set-up File Edit Monte ......................................................................................................................................................... Carlo Defaults Edit Unit ......................................................................................................................................................... Conversions Defaults Edit Neutron ......................................................................................................................................................... Tool Types set-up File

1447 1448 1449 1449 1450 1450 1450 1451

2 Shading ................................................................................................................................... Types 1452 3 Edit Global ................................................................................................................................... Sets 1455 4 Edit Zone ................................................................................................................................... Colors 1458 5 Edit Dip ................................................................................................................................... Symbols 1460 6 Edit Palettes ................................................................................................................................... 1461 7 Edit Default ................................................................................................................................... Lithology 1464 8 Edit Curve ................................................................................................................................... Aliasing 1469 9 Set Default ................................................................................................................................... Units 1482 10 Message ................................................................................................................................... Board 1484 11 Program ................................................................................................................................... Protection 1485 'IP Proprietary' ......................................................................................................................................................... Protection System Install and .................................................................................................................................................. Activate Protection Update.................................................................................................................................................. Protection Options Uninstall .................................................................................................................................................. or Transfer Protection View Protection .................................................................................................................................................. Options Licence.................................................................................................................................................. Server Installations Additional .................................................................................................................................................. License Activation Instructions

1486 1488 1491 1492 1495 1498 1506

12 Options ................................................................................................................................... 1510 External ......................................................................................................................................................... Database Options Well Options ......................................................................................................................................................... File Loader ......................................................................................................................................................... Well Folder ......................................................................................................................................................... Structure LAS 3 Configuration ......................................................................................................................................................... Miscellaneous ......................................................................................................................................................... Options Custom......................................................................................................................................................... Toolbars and Menus Well Security ......................................................................................................................................................... Curve Aliasing ......................................................................................................................................................... Corporate ......................................................................................................................................................... Search Folders

1511 1512 1520 1523 1527 1527 1530 1534 1535 1535

1544

Section 25 User Programs

1 Options ................................................................................................................................... 1546 2 New User ................................................................................................................................... Program 1549 3 User Program ................................................................................................................................... Code 1563 4 Example ................................................................................................................................... User Program 1 1570 5 Example ................................................................................................................................... User Program 2 1619 6 Example ................................................................................................................................... User Program 3 1625 7 Example ................................................................................................................................... User Program 4 1633 8 FORTRAN ................................................................................................................................... Guide 1636

1640

Section 26 Useful Links

Index

VIII

Interactive Petrophysics V3.5

Senergy

1642

Index

Index

Section

1 Introduction

2

1

Interactive Petrophysics V3.5

Senergy

Introduction

Interactive PetrophysicsTM (IP) is developed by Senergy Ltd in Banchory, Scotland. IP's technical support is provided by Schlumberger Information Solutions (SIS). All support issues, bugs and technical help should be referred to the users local SIS support desk http://www.slb.com/content/contact/sis support.asp Copyright Notice © 2008 Senergy Ltd. All rights reserved. Trademark Information Software application names used in this publication are trademarks of Senergy Ltd. Certain other products and product names are trademarks or registered trademarks of their respective companies or organizations.

Section 1.

Introduction :

Introduction

Senergy

Senergy Ltd Ternan House North Deeside Road Banchory Kincardineshire AB31 5YR Scotland website http://www.senergyltd.com

Section 1.

Introduction :

3

Section

2 Disclaimer of Warranty

Disclaimer of Warranty

Senergy

2

5

Disclaimer of Warranty

DISCLAIMER REGARDING THE USE OF THIS SOFTWARE – INTERACTIVE PETROPHYSICS V3.5 YOU EXPRESSLY ACKNOWLEDGE AND AGREE THAT USE OF THIS SOFTWARE IS AT YOUR SOLE RISK. BY DOWNLOADING/INSTALLING AND/OR USING THIS SOFTWARE YOU ARE CONSIDERED TO HAVE READ THIS DISCLAIMER AND AGREED TO ITS TERMS. THIS SOFTWARE AND THE ACCOMPANYING FILES ARE SUPPLIED "AS IS" AND WITHOUT WARRANTIES AS TO PERFORMANCE OR MERCHANTABILITY OR ANY OTHER WARRANTIES WHETHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE SOFTWARE IS WITH THE END USER. IN NO EVENT SHALL THE SELLER OR ITS AGENTS OR RESELLERS BE LIABLE FOR SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES. ANY LIABILITY OF THE SELLER OR ITS AGENTS OR RESELLERS WILL BE LIMITED EXCLUSIVELY TO PRODUCT REPLACEMENT OR REFUND OF PURCHASE PRICE. No part of this product may be reproduced, transmitted or translated by any means - graphical, electronic, or mechanical - including photocopying, recording, taping or storage in an information retrieval system, without the expressed written permission of Senergy Ltd. Further copies of this document are available from Senergy Ltd on request. Although every care has been taken to ensure that the information in this software and associated documentation is accurate and up to date, software is, by its very nature, complex and changeable. Senergy Ltd and its agents or resellers therefore cannot be held responsible for any error or omission in this software and the associated documentation. The information in this software and the associated documentation is subject to change without notice.

Section 2.

Disclaimer of Warranty :

Section

3 What's New in IP Version 3.5

What's New in IP Version 3.5

Senergy

3

7

What's New in IP Version 3.5

The following section briefly describes the new modules and the enhancements to existing modules that have been made to Interactive Petrophysics (IP), for those installing / upgrading to IP Version 3.5.

New Modules / Functionality Cluster Analysis · Groups log data into electro-Facies. · Module is multi-well. · Discriminators can be used to select data for the model build and model run. · Multiple Facies grouping can be output for comparison. · Cluster Means are user editable. · Five different hierarchical cluster methods can be employed to group the Cluster Means into smaller cluster groupings. · Output plots by well and crossplot of all wells can be used to interpret the results. Principal Component Analysis · Used for correlation and for input into other prediction modules. · Uses the same input window as Cluster Analysis. · Outputs one Principal Component curve per input curve. · Variability associated with each Principal Component is displayed. Curve Aliasing · Search order for curves can be setup and saved. · Search Set order. · Final curves searched first. · Three modes; Automatic, Manual and Off. · Aliasing works in all modules. DLIS Writer · Uses same interface as other writers. · Outputs well attributes and curve Set groups. Multi-curve Crossplot · Uses same setup window as Cluster Analysis. · Z-axis user defined. · Logarithmic scales. · 8 input curves plus Z-axis. · 2 discriminators. Corporate Search Paths · Allows users to define the location of selected IP files for easily sharing log plot, histogram and crossplot format files, user programs and IP configuration files. NMR Normalization · Create a 'symmetric' T2 distribution from an 'asymmetric' one.

Enhancements

Section 3.

What's New in IP Version 3.5 :

8

Interactive Petrophysics V3.5

Senergy

The following modifications / enhancements have been implemented in Version 3.5 to pre-existing modules: User Interface · Re-arranged menu items and created an Advanced Interpretation menu heading. · Addition of a Multi-Well menu heading. · User selectable work area background colour. · Sub-menu items can be created in user-defined menus. User Programs · Text parameters can be set up in a similar way to the Sw equation selection in the Phi/Sw module. · Parameter values can be changed from code. · Read and write all well and curve attributes from code. · An interactive crossplot can be created. · Visual Basic .NET compiler. · C# .NET Compiler. Log Plots · The zone Set name will now display in the zone track header. · Improved selection of plot header Remarks and unlimited number of remarks allowed. · Select curves from a log plot to display on a crossplot. · Annotation groups. · Editable depth tick marks. · Multiple waveforms can be plotted in one log plot track. · New functionality in the 'Plot Range Editor' module. Manage Log Curve Header · Clicking on the 'Shift Inc' column header now allows the user to apply a shift value to all curves listed. Manage Multi-Well Header Info. · Wells can be selected from a Well List. · Editable Well names. Data Saving · When saving ASCII data there is a choice of outputting the curve in CSV Format or as a text file. · If saving ASCII data in CSV Format there is a choice of delimiter; comma or semicolon. · Curve values can be output in ASCII and LAS format with the number of decimal places determined by the user. · Selecting wells to be output can be done using Well Lists or directly from the 'Load Wells from Database' option. Data Loading · Capillary Pressure Data Loader · Reduced memory footprint with DLIS Load. · Detailed curve description in DLIS loader form. · In the LAS Batch Loader there is a counter that shows how many LAS files have been selected to be loaded.

Section 3.

What's New in IP Version 3.5 :

What's New in IP Version 3.5

Senergy

9

· WindowsTM based GEOLOG is now supported. · Well selections can be filtered before importing data from external databases. · Curve Aliasing can be used to select output curves. Sets · Underscore characters are now allowed in the Set short names. · Irregular Set creation in Global Sets. Environmental Corrections · Standoff corrections can now be entered as a curve as well as a value. · Pathfinder LWD tool corrections. · Improved documentation of Environmental Correction modules. · Baker Atlas Focus neutron tool corrections. Crossplots · Sunburst background to crossplots available. · Variable point size. · Data filter. · Formation tops for Pressure crossplots. · Undo / redo functionality for interactive crossplots. · Wells can be selected from a Well List. Histograms · Sunburst background to histograms available. · Increased statistics available to view. · Mode, maximum and minimum lines can be added to histogram display. · Percentile statistics can be added to histogram display. · Undo / redo functionality for interactive histograms. · Wells can be selected from a Well List. Monte Carlo · A print button has been added to the Tornado Display Plot window. Clay Volume · Ability to show zone depths as well as zone names in each interpretation parameter tab. · Parameter zone locking. · Undo / redo functionality in the interactive plot. Porosity and Water Saturation · Total Porosity log plot - all effective curves removed. · Sw irreducible minimum limit parameter. · Modified Archie Indonesian equation added. · Calculation of Sw in a laminated sand layer can be done on the properties of the sand lamination. · Ability to show zone depths as well as zone names in each interpretation parameter tab. · Parameter zone locking. · Undo / redo functionality in the interactive plot. Cutoff and Summation · Ability to show zone depths as well as zone names in each interpretation parameter tab.

Section 3.

What's New in IP Version 3.5 :

10

Interactive Petrophysics V3.5

Senergy

· Parameter zone locking. · Undo / redo functionality in the interactive plot. Mineral Solver · Sw irreducible minimum limit parameter. · Modified Archie Indonesian water saturation equation added. · Model merge option which aims to smooth the transition from one model to another. · Auto update of the Cutoff and Summation module after running the Mineral Solver module. · Logic for modelling complicated invasion. · Increased Model Plot options. · Parameter zone locking. · Undo / redo functionality in the interactive plot. Multi-Well Parameter Set Distribution · Curve aliasing can be used to standardize curve names used in parameter Sets · Increased visualization of the input curve names used in each parameter Set. · Wells can be selected from a Well List. Multi-Well Batch Operation · The user can define the Set into which the result curves of a module will be output. · Depths over which a module is run can be defined. · Wells can be selected from a Well List. Multi-Well Change Parameters · Added the ability to change trend curve parameter. · Text parameters can be changed. · Wells can be selected from a Well List. NMR Interpretation · Calculate a Tapered (or Spectral) Bound Fluid · Volumetric analysis using the resistivity log and the Dual Water Equation. · Capillary pressure curves from NMR T2. · Parameter zone locking. Capillary Pressure Saturation Height · More flexibility in defining the Sw = f(J) equation · Refinement to adjust Permeability / Porosity in the J function when searching for the best fit. · Allow for variable hydrocarbon density as an input for calculating PC · More flexibility when working on creating the combined equation in the Cap. pressure function module. · Automatic handling of same depth Pc plug data. Interactive Block Depth Shift · Added a Select All button to the module. 3D Parameter Viewer · Functionality to display many parameter listings simultaneously within separate 3D Parameter Viewers.

Section 3.

What's New in IP Version 3.5 :

What's New in IP Version 3.5

Senergy

TDT Standalone Sw Analysis · Parameter zone locking. · Undo / redo functionality in the interactive plot. Basic Log Analysis · Parameter zone locking. · Undo / redo functionality in the interactive plot. Multi-Line Formulae · Full cut, copy and paste functionality now exists within the module. Real-Time Data Loader · Using Osprey Connect as the loader.

Section 3.

What's New in IP Version 3.5 :

11

Section

4 Getting Help and Program Updates

Getting Help and Program Updates

Senergy

4

13

Getting Help and Program Updates

Upon receiving the IP CD the following screen will appear when the the CD has been placed in the users computer CD drive. Click on 'Install IP' to start the IP installation wizard. The 'Demo Movie' button will display a brief animated overview of IP with a commentary by IP's creator, Frank Whitehead.

The Interactive Petrophysics (IP) CD is shipped with comprehensive HELP documentation on the features, functionality and 'Equations & Methodology' implemented in the software. Documentation is provided both as a PDF file (IP Help Manual V35.pdf) and an 'online' HELP document. The PDF file is located in the IP program directory within the Users Manual subdirectory. The online document is accessed in a number of ways: · 'Click' on the 'Help Topics' icon on the main IP 'Help' menu (shown below). Use the ' Contents' tab to browse to the required Help topic or use the 'Index' tab and type in a keyword. There is also a limited search facility in the 'Search' tab. Plus Help topics which the user would like to refer back to frequently can be added to the 'Favorites' tab. Or, alternatively · Place the mouse cursor over the Module item in the IP main menu bar that you wish to get help on and 'press' the keyboard 'F1' button. This will automatically launch the help document at the correct chapter. · All IP modules have a 'Help' button on the user-interface. These buttons will launch the interactive Help document when 'clicked'.

Section 4.

Getting Help and Program Updates :

14

Interactive Petrophysics V3.5

Senergy

The 'Core' interpretation modules 'Clay Volume', 'Porosity and Water Saturation' and 'Cut-off and Summation' have their own interactive 'Parameter Help' files which are launched from each modules 'Parameter' display. The content of the 'Parameter Help' screen updates when the user moves the mouse cursor between parameter columns in the interface. The 'Install Toolbox' button will install the Schlumberger Toolbox. The 'Install GCC Compiler' will install the GNU compilers necessary for compiling Fortran code in the 'User Programs' module. There is also a limited help prompt which appears on the Status Bar at the base of the IP main window. This is illustrated below in the following screenshot:

Section 4.

Getting Help and Program Updates :

Getting Help and Program Updates

Senergy

15

IP Database Format The IP database has changed between versions 3.5 and 3.4 and while version 3.5 will read a 3.4 database version 3.4 will not read a 3.5 database. Any 3.4 database will be converted to a 3.5 compatible format the first time the program saves data into a well data file - see 'Save Alls Wells to Database'. The 'IP User Forum', provides registration and access to Senergy Ltd.'s 'Interactive Petrophysics' User Forum. This web forum is managed by Senergy Ltd. to provide users with a resource for discussion of topics relating to IP and Petrophysics in general, and to enable users to share ideas, user programs, work flows that may be of use to the ever-expanding IP-user community.

Section 4.

Getting Help and Program Updates :

16

Interactive Petrophysics V3.5

Senergy

Entry to the website is restricted to registered IP users and can only be accessed from the connection button within the IP program. Registration is quick and very easy. Once registered the user will have to log on with a User name and Password each time the user wants to visit the 'IP User Forum' site. To check the version of IP that a user has installed on their computer use the 'About' button.

Support Portal The Schlumberger Information Solutions (SIS) Support Portal can be accessed at https://support.slb.com. Once a user is registered on the site they can submit support requests, join discussion forums and read the latest software news. Registering to the Support Portal is a one-time event. The menu item will direct your web browser to the login page.

Section 4.

Getting Help and Program Updates :

Getting Help and Program Updates

Senergy

A username and password can quickly be obtained by 'Registering' (use the link).

Section 4.

Getting Help and Program Updates :

17

18

Interactive Petrophysics V3.5

Senergy

Once logged in, the user selects the 'Interactive Petrophysics' product and then can search for answers to reported problems. There are three (3) ways to contact SIS Support for any Interactive Petrophysics issues. You can communicate your issues to SIS Support Helpdesk, either by: 1. Phone your local SIS Helpdesk directly. Their contact information can be found by logging into the SIS Support Portal and accessing left menu “Contact your Local Support Center” or directly http://support.slb.com/Home/SupportContacts/tabid/101/Default.aspx. 2. Log into SIS Support Portal and submit ticket from left tab of main Support Portal website via link "Customer Care Center". 3. After registering at SIS Support Portal (one-time event), send email request to [email protected] Your request will be assigned to your local SIS Helpdesk, then they will contact you.

Program Update IP update patch releases can be downloaded via two options; The 'Check for Updates' and the ' IP Download Website'. Program updates for the current IP release can be obtained over an internet connection. 1. An automated routine which runs an executable, GetIPUpdate.exe, can run to see if an update patch is available. The Currently loaded IP version number is compared to the 'Update Patch' version number to decide whether the patch should be accessible for download. The 'Download' button will only be activated when the Update patch is of a higher version number than the installed IP executable.

The user clicks the 'Download' button to download the update file. When a new patch is available an 'Update History' PDF document will accompany the patch, on the Senergy website. In this document all the bug fixes and enhancements that have been implemented since the version release are listed. The user can 'click' on the 'Update History' label to view / save this document. When the IP_Update.exe has been downloaded, the user can then install the update on their PC. NOTE: the IP program must be closed down BEFORE the IP_Update.exe install can be run. The IP_Update. exe is a self-extracting zip file which the user should 'double-click' on to run.

Section 4.

Getting Help and Program Updates :

Getting Help and Program Updates

Senergy

19

If the 'Turn Off Automatic updates' check-box is not 'checked' (the default position), each time the user runs IP, the application will browse to check for program updates over the internet. When an update is available the following message is displayed, which allows the user to select one of three options : · 'Yes' - Download the latest IP update. · 'No' - Continue to work with IP and ignore the download option. · 'Cancel' - Change the 'Turn Off Automatic updates' option to the 'on' ('checked') position.

2. Alternatively, the user can connect to the IP Download webpage using the 'IP Download Website' link'. This will open an Internet connection to the Senergy website. The user must provide some registration information to access the site. Once on the site the user will be able to download the latest IP program update.

Section 4.

Getting Help and Program Updates :

Section

5 PC System Requirements

PC System Requirements

Senergy

5

21

PC System Requirements

Typical PC Properties The following PC properties would be suitable for running IP: · 2.6 GHz PC with at least 1 GB of RAM. However, if working mainly with image logs or core photographs then a 3 GHz dual core Pentium processor (or equivalent) and 2 GB of RAM is recommended. · Any reasonable graphics card is acceptable. · The program will work well with IP databases either stored locally or accessed across a PC network. 10/100 Mbps network speed is fine. · Two 1280 x 1024 monitors is preferred, but a single monitor is acceptable. Interactive Petrophysics v3.5 (IP) is designed to run on the WINDOWS NT, 2000, WINDOWS XP 32-bit and 64-bit and VISTA 64-bit operating systems. To run on a 64 bit computer the following steps should be implemented: · Install SP2 for 64 bit Windows XP · Install Dot Net 64 bit (from Microsoft.com) · Install Directx 9.0c · Install IP v3.5 off CD · Download and install latest IP patch. IP v3.5 requires Microsoft .NET framework V2.0. If this is not already installed on the users PC then it will be automatically installed at the same time that IP is installed. The default installation directory for IP on XP is \Program Files\IntPetro35 on the PC hard drive. For Vista the default installation directory for IP is C:\Program files(x86)\IntPetro35. The default directory can be changed at installation. DirectX DirectX is a Windows technology that enables higher performance in graphics and sound when you're playing games or watching video on your PC. At the core of DirectX are its application programming interfaces, or APIs. The APIs act as a kind of bridge for the hardware and the software to "talk" to each other. The DirectX APIs give multimedia applications access to the advanced features of high-performance hardware such as three-dimensional (3-D) graphics acceleration chips and sound cards. They control low-level functions, including two-dimensional (2-D) graphics acceleration; support for input devices such as joysticks, keyboards, and mice; and control of sound mixing and sound output. Because of DirectX, what you experience with your computer is better 3-D graphics and immersive music and audio effects. The IP 'Well Map' feature and the '3D image viewer' (Note: this is not the '3D Parameter Viewer ') use DirectX Version 9.0c with the Managed DirectX components for Microsoft .NET. The DirectX 9.0c install files are included with IP and get installed with the product into the following Folder:C:\Program files\IntPetro\DirectX9 During the IP installation, if DirectX is not detected, you are asked if you want to install it. The following Setup programs from the DirectX9 folder are then run : 1) DXSetup.exe - The Main DirectX 9 files 2) MDXRedist.msi (Microsoft installable file) - The "Managed" components for .NET If you choose not to install DirectX from the installation you can run the above files manually at a

Section 5.

PC System Requirements :

22

Interactive Petrophysics V3.5

Senergy

later date. IP will give a warning if DirectX is not installed and you try to access the 'Well Map' module or the '3D Image Viewer' tool. If user has DirectX10 on their computer (Vista) then IP will work with this.

Section 5.

PC System Requirements :

Section

6 User Interface and Data Entry

24

6

Interactive Petrophysics V3.5

Senergy

User Interface and Data Entry

Standard WINDOWSÔ editing controls ('Copy', 'Cut', 'Paste' ...) are used to enter data into the IP program. Much of the 'edit' functionality is common throughout the program and is described here. IP Workspace Nomenclature IP is very user friendly, but a brief description of the IP workspace is required just so that users when talking about IP can relate encountered features to each other.

Multiple Workareas These enable the user to open multiple modules, log plots from many different wells at the same time and to order the IP workspace in a more efficient manner. The Workareas are handled as 'tabs' which can be seen at the top left of the grey Workarea. The 'tabs' work in a similar manner to Microsoft ExcelTM work sheets, in that they can be renamed, deleted and re-ordered. It is possible to get a thumbnail view of all the Workareas.

Section 6.

User Interface and Data Entry :

User Interface and Data Entry

Senergy

25

The number of Workareas that can be created is only limited by the users computer memory. To obtain an overview of all the Workareas 'clicking' on this symbol thumbnails, as seen below in this screenshot.

Section 6.

User Interface and Data Entry :

displays the Workarea

26

Interactive Petrophysics V3.5

Senergy

By right mouse button clicking on a Workarea tab a menu appears with the following options. · 'Close' - closes the visible Workarea · 'Close All But This' -closes all the hidden Workareas apart from the visible Workarea. NOTE: It is not possible to retrieve closed Workareas once they have been closed. · 'Rename' - user can type in a new name for the Workarea tab. · 'New Workarea' - creates a new Workarea · 'Get Window from' - if there is more than one Workarea created then a list of available Workareas is shown with the name of the modules and wells open in that Workarea. It is then possible to move the module or well plot window from the selected Workarea to the 'active' Workarea. This is better illustrated in the following screenshot:

Section 6.

User Interface and Data Entry :

User Interface and Data Entry

Senergy

Section 6.

User Interface and Data Entry :

27

28

Interactive Petrophysics V3.5

Senergy

Tabbed workareas can be switched off in 'Tools' ® 'Options' ® Miscellaneous Options. The close icon on the Work area tab can be hidden by 'unchecking' the box 'Hide close button on Work areas' in 'Tools' ® 'Options' ® 'Miscellaneous Options'. Toolbars

Most modules in IP can be launched from a 'Toolbar'. The visible toolbars can be turned 'on' and 'off' by either right-mouse-button-clicking in one of the toolbar tracks or by selecting the menu option 'View' ® 'Toolbars' and 'ticking' a required toolbar, or 'un-ticking' a toolbar that is not needed. A list of available toolbars is given below.

Section 6.

User Interface and Data Entry :

User Interface and Data Entry

Senergy

29

Toolbars can be placed on any side of the main IP window or can float on top of the window. The user can arrange the toolbar positions by left-mouse-button clicking on the left hand side of a toolbar and then dragging it to a new position. Toolbar positions are saved when the program is exited. User-defined toolbars can be created by clicking the 'Your Toolbars & Menus' menu option or by going to 'Tools' ® 'Options' ® 'Custom Toolbars and Menus'.

Section 6.

User Interface and Data Entry :

30

Interactive Petrophysics V3.5

Senergy

Select one of the 'User-defined' toolbars and then add the icons to it by dragging an icon from the 'Source list' to the 'Destination list' or by highlighting an icon in 'Source List' then use the left / right arrow buttons to move the icons to the 'Destination List'. The 'up' / 'down' buttons allow the order of the icons on the toolbar to be changed. Custom Menus These can be set-up from the 'Menus' tab of the 'Your Toolbars & Menus' window. The 'Name' of the custom menu is user editable and the various programs can be selected from the 'Source List' and added to the 'Destination Menu' by using the arrow buttons. Clicking 'OK' will close the 'Your Toolbars' window and the user created menu will be displayed along with the other IP menu items at the top of the IP screen.

Section 6.

User Interface and Data Entry :

User Interface and Data Entry

Senergy

31

Parameter Constant Boxes Any text-entry box in IP will accept manual keyboard text or number entry. The user simply 'clicks' in the text box and adds new / edits the existing value in the box. If the user 'right-mouse-button clicks' in the text box, a drop-down menu will appear, which allows the user to 'Cut', 'Copy' and ' Paste' to and from other samples of text in the WINDOWS system, using the standard WINDOWS Clipboard.

Text can be copied to and from external applications. The standard Windows shortcuts for 'Copy', 'Cut', 'Paste' and 'Undo' functions will work. · 'Copy'

'Ctrl+C'

Section 6.

User Interface and Data Entry :

32

Interactive Petrophysics V3.5

· 'Cut' · 'Paste' · 'Undo'

Senergy

'Ctrl+X' 'Ctrl+V' 'Ctrl+Z'

Curve Name Entry Drop-Down Boxes When a curve name is required as an input or output to a computation module, the 'Curve Name' box will expand to a drop-down list of all the curves in the current well. If the required curve name already exists, the name can be found in the list using the vertical scroll bar on the right hand side of the window.

When the drop-down list is displayed, the user can type the initial letter of the required curve name and the curve list will be repositioned to show curves whose names start with that initial letter. This is a quick way of locating a particular curve name. Some drop-down text edit boxes allow the user to type the curve name in directly. Others will only allow the user to pick from curves in the list. The latter type of box allows the user to type the first few letters of the curve name and the window will navigate straight to that curve name. Curve names are prefixed by their 'Curve Set' name and a separating colon ':'. Curve R1:ILD, in the example shown above, will be the ILD curve from the R1 curve Set. Where a number of curves, for example 'GR' exist in a well, but in different curve Sets, the curve list box will organize the curves in ascending alphabetic order and will then do a second 'alphabetic' sort on the 'Curve Set' name so that the user can easily find the curve name and then select the appropriate curve set too. Curve Name Entry from Curve List Form The 'Curve List' form is displayed by selecting the menu item 'Curves and Set names' under the 'View' menu or by 'clicking' the speed button (

Section 6.

).

User Interface and Data Entry :

User Interface and Data Entry

Senergy

33

The 'Curve List' form displays all curves in a well, plus the curve 'Sets' for the well. By highlighting a Set in the lower window, all the curves in that Set will be displayed in the upper ' Curves' window. If the user changes the well on display while the 'Curve List' window is active, the 'Refresh' button can be used to update the curve and Set data to the newly-selected well. The 'Curve List' form can be used to select curve names to be used on other forms. This can be done in two ways : · by 'clicking and dragging' the selected curve name from the 'Curve List' form to the other form · by 'clicking' on the name in the 'Curve List' form. This automatically puts the curve name into the clipboard. The user can then paste the curve name into the required box on the selected form by clicking in the box and using 'Ctrl V' or right-mouse-button click and 'Paste' . Curves can be dragged directly onto a log track in a log plot display and they will be automatically added into the track they are dropped into. Curve Name Selection using 'Curve Type' Most curve entry boxes that allow the user to type the curve name in, will allow the curve to be

Section 6.

User Interface and Data Entry :

34

Interactive Petrophysics V3.5

Senergy

selected using the 'generic' 'Curve Type' property (see Manage Curve Headers). The user prefixes a '*' or '@' character to the 'Curve Type'. For example '*GammaRay' or '@GammaRay' will select the gamma ray curve. See the section on Manage Curve Headers. If you want to use the generic curve reference in a user-defined formula you should use the '@curve name' syntax, since the '*' character is used as the 'multiplication' symbol. Depth Entry Boxes Depth entry boxes are often used to select the depth interval over which to run a calculation or an interpretation. Depths can either be manually typed into the 'Top Depth' and 'Bottom Depth' entry boxes, or can be pasted from the clipboard. If 'Top Depth' and 'Bottom Depth' entry boxes are left blank, the 'Well Top' and 'Well Bottom' depths for the current in-memory well, found in the IP title bar next to the Well name, will be used.

· By clicking in a track in a log plot display, the depth the user 'clicks' at is automatically pasted into the clipboard. This number can then be pasted into the depth box by right mouse clicking in the box and selecting paste (or 'Ctrl+V'). · The 'Select Zone Depths' button - In modules which allow the user to define the depth range for computations and settings to be picked from a Zone /Tops Set, the 'Select Zone Depths' button ( ) is displayed next to the depth entry boxes. Clicking this button will open up the 'Select Zone Depths' dialog as illustrated below.

The depths can now be picked from a particular 'Zone / Tops Set' using a zone top or bottom picked from a drop-down list. The user selects the 'Top Set' from the drop-down menu and then selects the 'Top' and 'Bottom' values. The depth values are pasted into the 'Start Depth' and ' Stop Depth' entry boxes when the 'OK' button is 'clicked'. Set Selection All modules that allow the selection of curve names as an input will have a 'Set Manager' button ( ). This button, if clicked, will display a pop-up window that allows the the user to select a ' Curve Set' name from which to choose the required curve. The 'Curve Name' drop-down list (See below) is filtered to display only those curves that are found within the selected 'Curve Set'. The '

Section 6.

User Interface and Data Entry :

User Interface and Data Entry

Senergy

35

All' Sets option will display all curves, including those in the 'Default Set' in the drop-down list. The 'Select Working Curve Set' window is closed by clicking the 'X' in the top right-hand corner of the dialog window.

Working Set The 'Working Set' is selected on the Main Menu bar (see below). This is used as a 'filter' to limit the curve names that can be selected for display in a log plot or in drop-down boxes in calculation modules. For example, if the 'Working Set' was set to 'R1' as shown below, then any IP modules that are run will use the 'R1' set of curves in the drop-down windows. The 'Set Name' can be changed locally using the 'Set Manager' button (

Section 6.

).

User Interface and Data Entry :

36

Interactive Petrophysics V3.5

Senergy

Output Set Name Most modules that create new, 'result' curves have an 'Output Set' button ( ). By clicking this button a drop-down box allows the selection of a common Set to be used for all output curves in the module. The output curve names will be changed to include the selected Set short name. Different Set names can be used for each output curve by manually typing the Set and curve names into the output boxes. The 'Create New Set' menu item will open the 'Edit Sets' window, so that a new Curve Set can be created.

Trend Curves and Parameter Selection The 'Interactive Trend Curve' feature enables the user to create a curve for any zonable parameter and use the 'Trend curve' in the interpretation modules in place of a numeric value. For example - 'GRclean' and 'GRclay' trend curves could be created and the trend lines used as input to the Vclay calculation module, instead of inputting numerical values for each zone, as shown below:

Section 6.

User Interface and Data Entry :

User Interface and Data Entry

Senergy

37

Trend curves can be created using the 'Interactive Trend /Square Curve' module or the 'Curve From Zones / Parameters' module. Window Menu Items These are standard WindowsTM menu items.

· 'Tile' - will rearrange open windows adjacent to each other. · 'Cascade' - rearranges open windows so that there is a progression from first opened window (bottom) to last opened window (top). · 'Arrange Icons' - if open windows are minimised and randomly scattered about the IP Workarea then 'clicking' 'Arrange Icons' causes the minimised windows to drop to the base of the Workarea and be arranged in a linear fashion. The list of available open windows is displayed below the 'Arrange Icons' option. 'Clicking' on one

Section 6.

User Interface and Data Entry :

38

Interactive Petrophysics V3.5

of these opens the window and brings it to the front on the IP Workarea.

Section 6.

User Interface and Data Entry :

Senergy

Section

7 Database Interface

40

Interactive Petrophysics V3.5

7

Senergy

Database Interface

The Interactive Petrophysics (IP) 'Database' is a way of organizing multiple wells as an interpretation 'project'. The database consists of a number of binary data files (.DAT Files) , one per well, stored together in a user-selected PC directory / folder. When you open IP, the directory name of the current active database is displayed in the bottom left hand corner of the main IP window. NOTE: · · · · ·

Up to 9,999 wells can be saved into an IP database. Up to 500 wells can be 'active' in memory at any one time. Each well can contain up to 50 Curve Sets Each well can contain up to 1500 curves. Up to 50 wells can be displayed simultaneously in a multi-well correlation plot.

Each database well consists of the log curve data, general well information and the interpretation 'Parameter Sets' associated with the well. IP works with well data loaded into memory. · Data can be loaded directly from an external database using the OpenWorks, GEOLOG, ODM, OpenSpirit or PETCOM Database links. · Alternatively, data can be loaded through one of the 'Input' modules. When wells are loaded into memory and worked on, the 'external' database disk files are not immediately updated, unless the 'Autosave' function is turned 'on'. Therefore, one can load a well from the database, perform computations and edits to curve data in the well and then simply discard the changes, without affecting the original well in the database. Multiple wells can be loaded into memory (with the 'multi-well' program option) with a maximum of 500 wells resident in memory at one time (although the database can store 9,999 wells, only 500 can be loaded into memory and worked on concurrently). This assumes that enough physical memory is available on the PC. If, when many wells are loaded, the program appears to be slow,

Section 7.

Database Interface :

Database Interface

Senergy

41

it is probably due to a lack of computer RAM. It is best to keep the number of loaded, in-memory wells to the ones necessary for the current interpretation session. The program has a mechanism to 'lock' any well that a user has opened. If another user tries to open the same well, the following message will appear.

The second user then has the option to open the well as a new well (i.e. copy the well into memory as a new well). If this is done then a 'Save to the Database' operation will create a new well entry, in addition to the original well. If the program crashes for some reason, the wells that were in memory will stay 'locked' if the user re-starts IP straight away. The user can either: · wait approximately 4-5 minutes and the wells will unlock themselves, or · delete the lock file IPDBLock, which can be found in the database root directory. NOTE: this file should never be deleted if there is any chance of more than one user currently using the database. IP Close Down and Start-up A 'checking' mechanism has been implemented that ensures that if IP is not closed down correctly then the user will be prompted the next time they open up IP with the following message.

Section 7.

Database Interface :

42

Interactive Petrophysics V3.5

Senergy

· 'Start IP Normally' - this will attempt to start IP with all settings the same as they were when IP was closed down. If this option does not open IP then select the 'Start IP in Safe Mode'. · 'Start IP in Safe Mode' - if this option is chosen then the IPDBList.ini file is deleted. This file contains a list of wells in the selected database. The user will then be asked to re-select the database wells once IP opens. This will create a new IPDBList.ini for the selected database. Advanced Options · 'Refresh user installation files?' - this option will overwrite the users installation files in

Section 7.

Database Interface :

Database Interface

Senergy

43

their C:\Documents and Settings\username\Local Settings\Application Data\IntPetro35 folder with default files. NOTE: if the user has made changes to the files within this folder, notably the CPARMDEF.PAR or Default Plots folder, then rename the IntPetro35 folder before 'checking' the 'Refresh user installation files' and clicking the 'Start IP' button. This will enable the user to copy back the users files into the 'new' IntPetro35 folder. · 'Restore IP configuration to defaults?' - this will restore IP back to its CD image state. IP Users and Database Files In each IP database directory, there will be a subdirectory named after each user that accesses the database. This subdirectory contains two files: · IntPetro.ini - this is the general configuration file. It keeps a record of the last item that was open in IP, including the last database, last well used, the dimensions of open log plots and Workarea information. For example, if the user was working on Well4 with a triple-combo plot open and then closed IP without first closing the plot then the next time IP was opened a Well4 triple-combo plot would be displayed. This file can be deleted but the next time IP is opened the user will be prompted to open a database. NOTE: deleting this file does not delete the items that were displayed but just the record of how they were displayed. · IPDBProj.dat - stores the parameter Sets when performing multi-well work. This file can be deleted but the multi-well parameter Sets would be lost. NOTE: do NOT delete this file if there is a chance that more than one user is currently accessing the database. NOTE: there is another IPDBProj.dat file which can be found in the project directory. This is used only if the Test IP database is accessed.

Beginning in IP3.4 there are now two additional file types within the IP project directory which support the 'History' module. These are: · IPDBWellxxxx_Hist.ald - this contains the actual details for the history event such as Clay Volume reports, parameters, JPG of environmental correction screens. This file is accessed when the user chooses to perform a difference comparison between parameters. · IPDBWellxxxx_Hist.ale - contains a data set of history events that includes an entry for each event, date, time, user, module and type. Within the IP project directory the following files are located: · IPDBWellList - this file can be thought of as a table of contents for IP. This file should be deleted if a well has been removed from or added directly (by copying the IPDBWellxxxx.dat file from another database in Explorer) into the database. Once the database is re-opened this file will be recreated with an updated list of available wells. NOTE: do NOT delete this file if there is a chance that more than one user is currently accessing the database.

Section 7.

Database Interface :

44

Interactive Petrophysics V3.5

Senergy

· ipfolder.ico - this is the IP icon that appears on the database folder when a user generates a new IP database. · IPDBLock - if IP closes incorrectly there is a possibility that IP will "lock" the well. The wells that were in memory will stay locked if the user re-opens IP straight away after it crashes. If the user waits 4-5 minutes the wells will "un-lock". However, a quicker way of getting the wells to un-lock is to delete the IPDBLock file. NOTE: do NOT delete this file if there is a chance that more than one user is currently accessing the database. · Desktop.ini - is the desktop icon settings file. Array Curve Data 'Conventional' log curves have one curve value per depth increment (the well 'Step') in an IP well. Array curve data can have multiple sample values per depth increment. The array can be one or two dimensional. A 'Z' dimension, where the depth sampling for the curve is greater than the normal depth sample, and a 'X' dimension, where multiple samples are stored for each depth level. Examples of array data are high resolution image data where the 'X' dimension will represent the values of the image around the borehole and the 'Z' dimension will be the high resolution depth sampling (~0.1 inch, 72 samples per 0.5 foot). Arrays can be of any size. Array data curves can be used as input to all IP modules. However, if the module was not designed to use array data then the value used in the module for each depth level will be the arithmetic average value of all the array samples at that depth level. Array data can use enormous amounts of memory. Therefore if the user intends to work with large intervals (> 100m) of image data (e.g. FMI) it will be necessary to have a relatively large amount of CPU RAM (+1 Gb). The program should work with smaller amounts of memory but it could be quite slow. Curve Sets 'Curve Sets' are a way of managing the curves associated with an IP well or IP database. Curve Sets have a 'Short' and 'Full' name. The 'Short Set Name', which has a maximum number of eight characters, is always prefixed to the front of any curve name, with a colon (:) separating the Set and curve name (e.g. R1:Gr would be the Gr curve in the R1 set). The 'Full Set Name' is a descriptor used by the user to document the purpose of the Set. A maximum of 50 Curve Sets can be created in a single IP well. All wells have a 'Default Set' which does not have a 'Short Set name'. Therefore a curve which is listed using its name only, for example - a curve name of Gr, would belong to the 'Default' Set. Curve names must be unique in each Set, but the same curve name can exist in several different Sets. Wells created in older IP versions, prior to version 3.2, will have all their curves saved in the ' Default Set'. Curves can be moved between Sets using the 'Manage Curve Headers' module or the 'Manage Curve Sets' module. Within the 'Manage Curve Sets' module curve Sets can be created and re-named plus a host of other functions.

Section 7.

Database Interface :

Database Interface

Senergy

Section 7.

Database Interface :

45

46

7.1

Interactive Petrophysics V3.5

Senergy

New Database

The 'New Database' button allows the user to manually type in, or browse to, a directory / folder location which will be used by IP as the project directory for a new database.

Section 7.1 Database Interface : New Database

Database Interface

Senergy

7.2

47

Open Database

The 'Open Database' menu item allows the user to select the directory under which the database data files are stored. The user can EITHER select one of the 'Recent Databases' from the 'Database' list. In this case the program remembers the previous well and plots that were loaded when that database was last accessed and automatically reloads them. The last 10 'Recent Databases' will be stored and displayed in the window. The user has the option to delete an entry by selecting the line and pressing the Delete key on the keyboard. This can be useful if the list contains entries which are no longer active, if, for example a database folder has been moved / renamed.

OR, If the required database is not in the 'Recent Databases' list then the 'Browse for IP Database' option should be 'checked' and the database location entered. The 'Browse' button allows the user to search the computer disk or any Networked drives for the appropriate directory. The default Read / Write file location can optionally be changed to conform to the new database location. It is good practice to have the 'Default File Location' set to the 'Database Location', since this will mean that all files belonging to a project will be grouped together under one directory.

Section 7.2 Database Interface : Open Database

48

Interactive Petrophysics V3.5

Senergy

If the user changes the 'Database Location', then the current database will be closed and the new database will be opened. In this case, the user will be asked whether the wells currently loaded into memory should be saved to the old database.

If the response is 'Yes' then the current wells will be saved to the old database. NOTE: Before the new database is opened, all wells loaded in memory will be removed from memory, therefore it is important to save the well data if it has changed. The 'Load Wells from Database' window will now be displayed to allow the user to select the wells to load into memory.

Section 7.2 Database Interface : Open Database

Database Interface

Senergy

7.3

49

Set Default File Location

The 'Set Default File Location' option is used by the program to define the 'input' and 'output' file locations.

The 'output' directory is especially important to set, since the output interpretation Parameter Sets are automatically written here, without the user being prompted to confirm the location, at the time they are created. The other directories are useful to set, but the user has full control over where the input files are loaded from and can override the default directory.

· 'Input Directory' : This is where the program will look to find input data files and input Parameter Sets. · 'Output Directory' : This is where the program will save output data files and Parameter Sets. Normally, the input and output directories are the same. · 'Use separate Input / Output directory for each well' : If this box is 'checked' then a

Section 7.3 Database Interface : Set Default File Location

50

Interactive Petrophysics V3.5

Senergy

new subdirectory called …\Well**** will be created for each well under the 'Output Directory' name, where **** is the database well number. This allows the user to group together, by well, all the text and format files that IP can output. When changing databases, the program looks to see if separate output directories are used and then sets this option automatically. However, it is good practice to 'check' this option when creating a new database, to make sure that it is set the way you want. NOTE: The Well subdirectory is created at the same time as a well is created in IP. In the Well**** folder are files specific to the well such as interpretation parameter Sets (.set) and well specific log plots (.plt), crossplots (.xpt),formulas (.frm), depthshifts (.sfo and .sft), text files (.txt), and colour tables (.col). The rest of the information is saved in the binary IPDBWellxxxx.dat file. The IPDBWellxxxx.dat files should not be deleted as all IP related information for that well will be lost. Also within the Well subdirectory are further sub-directories. These are defined in 'Well Folder Structure'. · 'Formula Directory' : This is the directory where the 'User formula' module saves equations, which can be recalled & re-applied at a later time. · The 'Browse' buttons allow you to search the disk structure to find the directory you want. · The 'Same Directory for all' 'check' box sets the input, output and formula directories to the directory path defined in the 'Input Directory' box. · 'Apply' applies the changes to the current session.

Section 7.3 Database Interface : Set Default File Location

Database Interface

Senergy

7.4

51

Explore Database Folder

The 'Explore Database Folder' option provides the user with a shortcut to browse to the the current IP project directory/folder, without having to navigate the local hard drive or PC network.

Section 7.4 Database Interface : Explore Database Folder

52

Interactive Petrophysics V3.5

Section 7.4 Database Interface : Explore Database Folder

Senergy

Database Interface

Senergy

7.5

53

File - Save Current Well As...

The 'Save Current Well As...' module can be accessed from the 'File' and 'Well' menu items.

The user has a number of options for storing the current in-memory well to either the currently active IP database or to another IP database folder. 3 radio buttons control how IP saves a single well. These are: · 'Update selected well in the database' · 'Create a new well in current database' · 'Create a new well in another database'

Section 7.5 Database Interface : File - Save Current Well As...

54

Interactive Petrophysics V3.5

Senergy

The options are described fully below. · 'Update selected well in database'. If the displayed well has already been saved to the current IP database, selecting this option and clicking the 'OK' button, saves any changes you have made to the well to the IP database binary file. This option will not be available for a well that has been newly-created in the current IP session. · 'Create a new well in current database'. This option can be used; · either to save the currently-displayed well to the current IP database, but under a different well number. This is a method for creating a duplicate of an existing well in the database, or · to create a completely new IP well, with a new 'binary' file, IPDBWellxxxx.dat, file in the current database. NOTE: the user is able to specify the database number that they wish to store a new, or duplicate, well to. The options are: 1. Do not fill in a Database Well Number - By leaving the 'Database Well number' text box empty, the program will automatically assign the next available database number to the well to be saved. This means that, for example, in a multi-well database where database well number 3 is vacant, IP will assign the next well to database number 3. If wells have been saved to consecutive database numbers, then the next well saved to the database will be assigned the next available number in the numbering sequence. 2. Fill in a Database Well Number - Typing a 'Database Well number' into the text entry box allows you to dictate where to save your in-memory well to. If you type in a Database Well number that already exists, you will be warned of the fact and asked to select a different Database Well number.

Section 7.5 Database Interface : File - Save Current Well As...

Senergy

Database Interface

55

· 'Create a new well in another database'. Selecting this option allows you to save the currently-displayed well to a different database thus enabling the user to merge IP databases. This does not change or delete the well in the current database. The ' Database Name' text entry box and 'Select' button allow you to browse to another IP database folder where you would like to save the new well. NOTE: the Well Folder is not copied across only the IPDBWellxxxx.dat. The Well Folders containing any plot, crossplot formats etc. would have to be manually copied across using Windows Explorer, making sure the Well number on the folder matched the newly created Database Well number. To get IP to recognise the copied Well Folders delete the username folder (containing IntPetro.ini and IPBDProj.dat files) in the new project and restart IP. Another way of merging two IP databases together is to make a copy of one database. Rename all the wells in that database so that the names of the wells in the copied database won't overwrite the wells in the other database. Once the wells have been renamed then copy these into the other database. Delete the IPDBWellList file found in the merged database folder. Delete the IntPetro.ini and IPDBProj.dat files found in the users folder within the merged IP database. When the merged database is loaded into IP the user will have to reload all the wells, this will then recreate the IPDBWellList for the merged database.

Section 7.5 Database Interface : File - Save Current Well As...

56

Interactive Petrophysics V3.5

Section 7.5 Database Interface : File - Save Current Well As...

Senergy

Database Interface

Senergy

7.6

57

Save All Wells to Database

Selecting the 'Save All Wells to Database' option will update the database binary files (IPDBWellXXXX.dat) for the wells that are currently loaded into your PC RAM. For a newly-created well, a new 'IPDBWellXXXX.dat' file will be created in the IP database folder. NOTE: if there is a gap in the IPDBWellXXXX numbering, then a newly-created well will, by default, be saved into the first vacant position in the database folder. If multiple new wells are created and data loaded into them; on 'Save All Wells to Database', IP offers the following 'confirm' dialogue:

Selecting 'Yes to All' will save all new wells to the database as IPDBWellXXXX.dat files, without having to confirm the 'save' operation for each individual well. NOTE: If your IP database wells have consecutive binary file names, for example: IPDBWell0001.dat IPDBWell0002.dat IPDBWell0003.dat IPDBWell0004.dat IPDBWell0005.dat Then any new well will be saved to the next highest data file number i.e. IPDBWell0006.dat If, however, you have deleted a well from your database, removing the IPDBWell000X.dat file in the process, then a newly-created well will be saved into the first vacant IPBDWell000X.dat position. For example, if IPDBWell0002.dat has been deleted, as illustrated below, then the next new well saved to the database will, by default, be saved to this database binary file. IPDBWell0001.dat à position) IPDBWell0003.dat IPDBWell0004.dat IPDBWell0005.dat

IPDBWell0001.dat IPDBWell0002.dat (new well inserted into first vacant database IPDBWell0003.dat IPDBWell0004.dat IPDBWell0005.dat

In IP Version 3.3 and later versions, the user is given the opportunity to choose the database number for multiple newly-created wells. On selecting the 'Save all Wells to Database' option a dialog will launch similar to that shown below:

Section 7.6 Database Interface : Save All Wells to Database

58

Interactive Petrophysics V3.5

Senergy

You can choose a database number for each new well, or let IP assign database numbers automatically. If the user has opened an older database within IP v3.5 and attempts to save the wells, the following warning message appears:

This gives the user a chance not to save the wells in version 3.5 and thus not make them incompatible with the version of IP from which they originated.

Section 7.6 Database Interface : Save All Wells to Database

Database Interface

Senergy

7.7

59

Auto Save

The 'Auto Save' window is used to set up the options for the saving of all well data at user-defined time intervals. This is equivalent to manually clicking the 'Save All Wells to Database' menu item at the same time intervals. The function is accessed under the 'File' menu item. · To set up the Automatic Backup facility the user should 'check' the 'Auto Save All Data every' check box and type in a value into the 'Minutes' text entry box to set the time interval for auto-saves. · Clicking the 'Apply' button applies the changes to the current session, but does not save the settings for subsequent sessions. · Clicking the 'Update Defaults' button applies the current auto-save settings and then writes the changes to the ProgDefs.opt file in the IP program directory so that they will be used the next time the user accesses the program.

Section 7.7 Database Interface : Auto Save

60

7.8

Interactive Petrophysics V3.5

Senergy

Printer Setup

The 'Printer Setup' menu item will bring up the standard WINDOWS printer selection dialog where the default printer for IP can be selected for this session.

This printer will be used for all printer output, except the Log Plot displays, in the case of Log Plots a different output device can be selected by the user from the hardcopy dialog screen.

Section 7.8 Database Interface : Printer Setup

Section

8 Database Security

62

8

Interactive Petrophysics V3.5

Senergy

Database Security

The purpose of this module is to allow the user to set access limits to wells in a shared IP database. This could be to stop un-authorised users from viewing and modifying IP wells. Also to control access to 'tight' (i.e. wells that have very limited authorised access) wells to one or two specified users. Some wells may need 'Read' access by many users but only 'Write' access by one user. To access the database security menu go to 'Tools' ® 'Options' ® 'Well Security'

The following topic options are available from the 'Well Security' module: · Well Selection · Password · Users · Project Defaults · Applying Security

Section 8.

Database Security :

Database Security

Senergy

8.1

63

Well Security

Each well in a database can have its own security settings. These are stored in an encrypted format within the well's data file. The security settings stored within each well include: · An optional password. If this is set then it must be re-entered on subsequent attempts to change the wells' security settings. · A list of usernames and their access rights (none, read-only or full). The special user called 'All Other Users' is used to define the access rights for all users that are not specifically listed. · The last time the security was set and the username of who set the security. In addition, each database can have a 'Project Default' security setting, which is used for newly created wells, or wells which do not have their own security settings. 'Clicking' on the 'Well Security' option the following screen appears:

Well Selection Within this area it is possible to select wells and then to view the security which has been applied to the wells. NOTE: Wells have to be saved to database before they will appear in the database lists - see 'Save All Wells to Database' for more information on saving wells. These are the different well selection options available: · 'From List' - If this is selected then the 'Select Wells' button becomes 'active'. 'Clicking' the 'Select Wells' button brings up a screen very similar to the database loading screen where it is possible to select wells on an individual basis.

Section 8.1 Database Security : Well Security

64

Interactive Petrophysics V3.5

Senergy

Once the wells have been selected and 'OK' has been 'clicked' then in the 'Well Selection' area the number of wells selected updates. · 'Current Well' - Whatever is the current 'active' well is selected. If there is no current well then this option will not be available. · 'All Wells in memory' - This will apply security to the loaded wells only. If there are no loaded wells then this option will not be available. · 'All Wells in database' - This is the default option and selects all the wells in database whether they are loaded or not. The number of wells that security will be applied to is always shown in the top right of the module. If no wells are selected then the 'View Security for Selected Wells' and 'Apply Security' buttons will be 'greyed' out. After the wells have been selected it is possible to view the security settings for the wells using the 'View Security for Selected Wells' button.

Section 8.1 Database Security : Well Security

Database Security

Senergy

65

Each well is listed in the 'Wells' pane and shows whether or not it has a password set and when the security was last updated and by whom. Selecting a well shows the list of usernames and their access rights in the 'Users' pane. Password A password can be set by the user to stop other users from changing the security settings on any of the wells within an IP database. 'Click' on the 'Set New Password' and type in a 'New Password' in the text box. To activate the password 'click' on the 'Apply Security' button.

Section 8.1 Database Security : Well Security

66

Interactive Petrophysics V3.5

Senergy

Once this password has been set then it must be entered into the 'Password' text box before any further changes can be applied to the security settings on the wells within the IP database or if the user wants to change the current password. The password can be removed from a well or wells by ticking 'Set New Password' but leaving the 'New Password' box empty. If the password is forgotten then clicking the 'Forgotten the password?' text brings up a dialogue box like this:

Users can use the 'Copy to Clipboard' button and paste the 'Password Override Request Key' into an email and send it to SIS IP support - http://www.support.slb.com Users This area is used to determine which IP database users can have access to the IP database selected wells. A user can be given 'Read' or 'Read' and 'Write' privileges. If no boxes are 'checked' then the user has no access rights. When adding a user the 'Domain' defaults to the users current domain, but this can be changed if required. Once added, a user's access rights can be changed by 'ticking' or 'un-ticking' their 'Read ' or 'Write' boxes. The 'All Other Users' user cannot be removed. The same username cannot be entered more than once. The list of user names can be saved to a text file using the 'Save' button. This could then be reloaded later using the 'Load' button instead of having to type them all in again. To illustrate the security functionality, imagine the scenario where there are 4 users; Tim, Andy, Martin and Derek. There are 10 wells in the IP database. All users can have 'Read' / 'Write' access to Well # 1, 2, 4, 5, 6, 7, 8, 9, 10. Well #3 is a 'tight' well and only Derek can access this. This is how the security would be set up: · Select wells 1,2,4,5,6,7,8,9,10 in 'Well Selection' · In 'Users' 'Add' Andy, Derek, Martin and Tim 'Usernames'.

Section 8.1 Database Security : Well Security

Database Security

Senergy

· · · · · · ·

67

Give all the users 'Read' / 'Write' access Type in the password if one has been set. 'Click' 'Apply Security' In 'Well Selection' select well #3 In 'Users' just leave Derek with 'Read' / 'Write' access. 'Click' 'Apply Security'. 'Click' on 'View Security for Selected Wells' and 'click' on the wells. In the 'Users' box there is a list of 'Usernames' and their 'Access' rights. For well #3 it can be seen that only Derek has full access rights and for the rest of the wells all users have full access rights.

Section 8.1 Database Security : Well Security

68

Interactive Petrophysics V3.5

Senergy

Project Defaults If 'Project Defaults' are present then they will be loaded and displayed when this 'Well Security' screen is first displayed. The user can save the current setting as the 'Project Defaults' by 'ticking' the 'Save as Project Defaults for new wells' before applying the security. This will create (or update) the security settings file. If the current 'Project Defaults' have a password set then they will only be updated if the supplied password matches. 'Project Defaults' can be reloaded at any time by clicking the 'Reload Project Defaults' button. Applying Security 'Click' the 'Apply Security' button to apply the specified security to the selected wells. A progress bar will be displayed while the security is applied, followed by the 'Well Security Application Results' form. This includes a row for each well and whether or not the application worked, and if not, it will explain why not (such as password mismatch). Failures are shown in red. There is a tick box 'Only show failures'.

Section 8.1 Database Security : Well Security

Database Security

Senergy

69

Implications of Security When using IP the current user's access rights will manifest themselves in the following ways: · No Access 'Select Database Wells to Load' screen: Well is shown in red with no details other than the name of the well. Well cannot be loaded or deleted.

'Database Browser' screen: By default 'No Access' wells are not shown in the 'Database Browser'. To show them, right-click and select 'Show/Hide' and tick 'Show Wells I Can't Access'. Once the well is visible it is shown with a no-entry icon and no further details.

Section 8.1 Database Security : Well Security

70

Interactive Petrophysics V3.5

Senergy

· Read-only Access 'Select Database Wells to Load' screen: Well(s) is shown in grey and loading the well will always create a copy of the well (shown in the 'Database Browser' with a different icon and 'Copy of' in front of the well name).

Section 8.1 Database Security : Well Security

Database Security

Senergy

'Database Browser' screen: Well is shown with a read-only icon and loading it will always create a copy.

Section 8.1 Database Security : Well Security

71

72

Interactive Petrophysics V3.5

· Full access IP operates as normal.

Section 8.1 Database Security : Well Security

Senergy

Section

9 Well Management

74

Interactive Petrophysics V3.5

9

Senergy

Well Management

The 'Well Management' options, highlighted in blue in the following screen capture, allow the user to load, create, display and close wells in IP and to edit well name and well location data. IP will allow the user to have up to 500 wells loaded into memory at any one time, depending on the amount of RAM your PC has. A PC with 512Mb of RAM will be sufficient to load and work on wells containing conventional curve data. A minimum of 2Gb of RAM will be required if you are working with acoustic/electric image data.

The following options are included within the 'Well Management' tools: · · · · · · · ·

'Load Wells from Database' 'Create New Well' 'Select Well' 'Save Current Well As...' 'Close Well(s)...' 'Delete Well(s)...' 'Reset Current Well' 'Manage Well Header Info.'

Section 9.

Well Management :

Well Management

Senergy

Section 9.

Well Management :

75

76

9.1

Interactive Petrophysics V3.5

Senergy

Load Wells from Database

The 'Load Wells from Database' option will allow the user to load wells into memory, where they can be worked on in IP. The selected wells in the IP database will be listed in a window similar to that shown below. When the window is launched, wells that are currently loaded into memory will be highlighted with a blue background colour. If well security has been set up using the 'Well Security' module then the screen may look very different to that shown below.

To Load wells into Memory: Highlight the wells in the list that you want to load into memory, using one of the following options: · 'Click' on the 'Select All' button. 'Click' the 'Load' button, or · Highlight an individual well to load. 'Click' the 'Load' button, or · 'Click' on a well and, holding down the 'Shift' key, 'click' on a well further up/down the list to select all wells between the two end wells.'Click' on 'Load', or · 'Click' on a well and, holding down the 'Ctrl' key, 'click' on additional wells in the list to select them individually.'Click' on 'Load'. The 'Well #', shown in the left-hand column of the table, corresponds to the IP 'Database well number'. This is used in naming the binary data files (IPDBWellXXXX.DAT) which store all the curves, parameter sets and plot formats for each IP well. The 'Database Well Number' is a common feature in many IP windows and is used to switch between wells on the main menu ' Well counter', illustrated below. Also, any 'Select Well' dialog will list the 'Database Well Number ' along with the 'Well Name'.

Section 9.1 Well Management : Load Wells from Database

Well Management

Senergy

77

The available wells list in the 'Load Wells from Database' interface can be sorted by any of the fields displayed in the window using the 'Primary Sort Order' drop-down list. 'The Secondary Sort Order' can be used to refine the sorting order of the 'Primary Sort Order' list. The well API and UWI number can now be seen on the well loader screen by 'clicking' 'Display Well API' and 'Display Well UWI'. The wells can also be sorted by API and UWI. The column headers are now resizable which facilitates the display of long well names. The sort order can be reversed by 'clicking' the 'Reverse sort' box. Alternatively, by 'clicking' on a column header the column list will be sorted in ascending/descending order depending on the data type. 'Clicking' on the column header again reverses the sort.

Saving Well Lists: The 'Save Well List' and 'Load Well List' buttons allow the user to create and save a list of wells and then restore them at a later date. This can be useful if there are many wells in the database and the user only wants to work on a subset of the wells at any one time. NOTE: the well list will include all selected wells plus wells already loaded in memory. · To save a well list of unloaded wells - highlight the wells to be included in the list and then click the 'Save Well List' button. · To save a well list of loaded wells - just click the 'Save Well List' button. This assumes that the user only has the wells loaded that the user wants to make a list from. If the user has many loaded wells and only wants to make a list of certain wells then the user will have to close all wells (go to Database Browser, highlight all wells and right-mouse button click to display menu and select 'Close Well(s)'). Open the 'Load Wells from Database' and select the wells for the list and 'click' the 'Save Well List' button. Once the list has been created, 'Select All' and 'Load' to populate the Database Browser

Section 9.1 Well Management : Load Wells from Database

78

Interactive Petrophysics V3.5

Senergy

again. · To load the well list click the 'Load Well List' button, which launches a 'browser' window in the IP project directory. Browse to the directory / folder where you saved the well list and select the required list. The 'Print' button allows the user to output the database well list to a printer, disk file or into the clipboard for inclusion in another document.

Section 9.1 Well Management : Load Wells from Database

Well Management

Senergy

9.2

79

Create New Well

The 'Create New Well' menu function will automatically create a new, empty well and display the ' Create New Well' window. This allows the user to set the well name and depth/time intervals and depth Units for the well.

The 'Well Comment' (see 'Manage Well Header Info.') can be set from the 'Well Name' box by placing a colon, with a space before and after, ( : ) after the well name and appending the well comment. For example '14/19-23 : Preliminary' will create a well name of '14/19-23' with a well comment of 'Preliminary'. If the 'Top', 'Bottom', 'Step' and 'Units' boxes are left 'blank' then the well Depth/Time interval will be taken from the first data file (ASCII, LAS, LIS, DLIS) loaded into the well. This gives the user the ability to allow the program to adapt the intervals in the well to the input file intervals. If no wells are loaded at start-up or the database location is changed, a blank well is automatically created. Therefore, the 'Create New Well' menu function does not need to be run to load the first well into memory. Creating a new well does not automatically create a new well in the database (database disk file). This is only done when the well is saved to the database. The new well is initially created only in memory.

Section 9.2 Well Management : Create New Well

80

9.3

Interactive Petrophysics V3.5

Senergy

Select Well to Display

The 'Select Well to Display' option allows the user to select a well to be displayed, for example, in a log plot or to be worked on using the editing and interpretation modules. The selected well will subsequently become the 'active well' for any new IP module that is launched. The 'Well Name' is displayed on the title bar of the main IP window, and in any secondary, interpretation windows that are processing this well.

The 'Database Well Number' is displayed, in brackets, at the beginning of each line. A 'negative' database well number means that the well does not currently exist in the database, only in memory. This 'negative' number will change to a 'positive' database well number after the well has been saved / added to the database. For example, in the following screen shot, two wells have negative database numbers (-5) and (-6), meaning that they exist only in memory.

Section 9.3 Well Management : Select Well to Display

Well Management

Senergy

81

The current, in-memory well can also be changed either : · by clicking on the left / right arrows next to the 'Well' number on the main menu bar. · by using the F11 (up) and F12 (down) keys. · by typing the 'Database Well Number' you wish to see, into the 'Well' box.

The currently-displayed well name is also shown at the base of the main IP window along with its database number. The example 'captured' above shows that well A5 is the currently-selected well and it is database well number '76' in the 'MultiWell test' database. Select - Well List In each of the modules listed below there is a 'Select - Well List' or 'Advanced Well Select' option. This opens a 'Select Wells' module which allows the user to select wells from currently loaded database wells and then to save the selected wells to a well list file. · · · · · · · · ·

'Multi-Well Batch Operation' 'Multi-Well Cutoff and Summation' 'Multi-Well Correlation' 'Multi-well Curve Statistics' 'Manage Multi-Well Header Info' 'Manage Multi-Well Curve Sets' 'Manage Multi-Well Curve Headers' 'Multi-Well Histogram' 'Multi-Well Crossplot'

Section 9.3 Well Management : Select Well to Display

82

Interactive Petrophysics V3.5

Senergy

NOTE: well lists can also be created in the 'Well' ® 'Load Wells from Database' module. The well list file can then be recalled in the two modules listed below as well as all the modules listed above. · 'Multi-well Parameter Distribution' · 'Multi-Well Change Parameters' Creating well lists is very easy to do. Wells must be loaded in memory so that they will appear in the 'Available Wells' column of the 'Select Wells' module. The 'Available Wells' can be dragged across individually using the mouse into the 'Selected Wells' column or a number of wells can be selected using the left mouse button and the 'Shift' key and then dragged across. They can also be selected individually using the chevron key '>' or collectively using the double chevron key '>>'. It is also now possible to select wells by double clicking on the well in the 'Available Wells' list and it will automatically move to the 'Selected Wells' list. The 'Sort' check box allows the user to arrange the 'Available wells' list in ascending alphabetic order, making the selection of individual wells easier when many wells are loaded in memory.The well selection is confirmed by clicking the 'OK' button. Once the wells have been chosen use the 'Save Well List' to open the 'Save Well List' module. Browse to a relevant folder; the default folder is the active database project folder, and enter a name for the well list and click 'Save'. x

Section 9.3 Well Management : Select Well to Display

Senergy

Well Management

To retrieve a saved well list 'click' on the 'Select Well List' and the 'Load Well List' Module appears with any saved wells lists appearing as *.wst files.

Section 9.3 Well Management : Select Well to Display

83

84

9.4

Interactive Petrophysics V3.5

Senergy

Well - Save Current Well As...

The 'Save Current Well As...' module can be accessed from the 'File' and 'Well' menu items.

Section 9.4 Well Management : Well - Save Current Well As...

Well Management

Senergy

9.5

85

Close Well

'Close well' allows you to remove an 'in-memory' well from RAM and optionally save any updates you might have made to the well to the IP database.

Select the well or wells you wish to close and remove from memory (use SHIFT or CTRL keyboard keys and mouse button to highlight multiple wells) and 'click' the 'OK' button. You will be asked to confirm whether the wells should be saved to the database. If the user selects 'No' then the wells won't be saved and will not be available the next time the user opens up IP with that database.

Section 9.5 Well Management : Close Well

86

Interactive Petrophysics V3.5

Section 9.5 Well Management : Close Well

Senergy

Well Management

Senergy

9.6

87

Delete Well

This menu option allows you to entirely remove a well and all its sub-folders and associated files from within an IP database. NOTE: when this option is used not only will the IPDBWellxxxx.dat file be deleted but also the Wellxxxx folder plus the contents of the folder.

Select the well(s) you want to delete and click the 'Delete' button. This deletes the database well. If a selected well is currently loaded into memory the 'Delete' operation does not remove this well from memory, it just flags the well as not loaded from the database. In this case, the user must first use the 'Close Well' menu option to take the well out of memory. Then choose the 'Delete Well From Database' menu option, select the well and click 'Delete'.

Section 9.6 Well Management : Delete Well

88

9.7

Interactive Petrophysics V3.5

Senergy

Reset Current Well

The 'Reset Current Well' option allows the user to undo all the operations performed on the current well in memory, back to the last time that the 'Save All Wells to database' or 'Save current well to database As' option was executed. The 'Reset Current Well' function closes the current well and re-opens it to its' 'last-saved' condition.

The user is prompted to confirm the intended operation.

Section 9.7 Well Management : Reset Current Well

Well Management

Senergy

9.8

89

Manage Well Header Info.

The 'Manage Well Header Info.' module allows the user to enter and save well 'Cultural' information and other important 'Position', petrophysical 'Default Parameters' and 'Logging' data fields for wells loaded to an IP database. There is also a 'History' button which will allow the user to display changes made to the well curves by different IP users connected to the same database. Well Header data can be loaded to IP in a number of ways: 1. by manually typing in text into the text-entry boxes for each database well. 2. by bulk loading header information for multiple wells from an external ASCII text file, using the 'Load Well Attributes' module. The external file can be space-, tab, comma-delimited or in a 'Fixed' format. 3. by loading header data from external data files (LAS, LIS, DLIS). 4. by loading header data from external databases using IP's 'External Database Connection' functionality. 5. by loading header data from an external database via an OpenSpirit Connection. The 'Manage Well Header Info.' module has been re-engineered in IP V3.3 and later versions to be 'user-configurable'. This means that the user has control over certain (editable) well data ' attributes' that are available for a well. 'Attributes' are parameters associated with a well and they can be divided into 'Cultural Attributes' or 'Log Attributes'. · 'Cultural Attributes' are parameters to do with well ownership, location, operating dates etc.. and include such parameters as 'Operating Company', 'Location', 'Spud Date' - all those options found on the 'General' tab within this module. · 'Log Attributes' include those 'logging' parameters found in the header sections of digital log curve (LAS, LIS, DLIS) files. Parameters such as 'Log Run Number', 'Mud Resistivity', 'Mud Filtrate Resistivity' are examples of 'Log attributes'. These data types are stored in the 'Logging' tab within this module. In addition, well location information (Latitude /Longitude, UTM easting / UTM Northing & UTM Zone) are loaded into the ' Position' tab. Rig reference elevations, water depths and log measurement datum's are stored as attributes that can be viewed on the 'Default Parameters' tab. Using the 'Tools' menu - 'Options' menu item, the user has the ability to 'add' attributes, set 'Alias' names or 'delete' attributes as necessary. See the 'Options' chapter, 'Well Options' and ' File Loader' topics for a full discussion of this functionality. 'Well Header' information can be manually entered into 6 'tabbed' screens. These are: · · · · · ·

'General' 'Position' 'Default Parameters' 'Logging' 'Plot Remarks' 'Plot Annotations'

Section 9.8 Well Management : Manage Well Header Info.

90

Interactive Petrophysics V3.5

Senergy

'General' Tab The 'General' tab allows the user to set up ''Cultural information about a well, including its Well Name, Operating Company, Spud Date etc... The 'Well Comment' field is used to distinguish IP database wells which have the same physical well names. For example the user might perform a preliminary interpretation on a well and then carry out a 'final' interpretation. If the interpretations are both kept as separate wells in the IP database then the well comment field could be used to distinguish between them. For example one could have a comment field of 'Preliminary' and the other 'Final'. From the 'Comment with Well' drop-down menu four options are available: · 'None' · 'Well Comment' · 'API' · 'UWI'

Section 9.8 Well Management : Manage Well Header Info.

Senergy

Well Management

91

Depending on which is chosen then, within the program, anywhere the well name is displayed the 'Comment' is appended to the end of the well name (as shown in the screen below). This is useful if two IP database wells have the same physical well name, since it allows the user to very easily tell them apart. For the log plot hardcopy output there is an option on the output set-up screen to override this option.

The 'History' button will take the user to the 'History' module. A screen similar to the one below will be displayed.

Section 9.8 Well Management : Manage Well Header Info.

92

Interactive Petrophysics V3.5

Senergy

'Position' Tab The 'Position' tab allows the user to enter well positioning information, which will enable the well to be viewed in the 'Well Map' and '3D Parameter Viewer' displays. If the 'Well Surface Position' boxes are empty, loading an LIS, DLIS or LAS file, with Latitude and Longitude (LATI/LONG) fields in the respective File headers, will automatically fill in the Lat - Long boxes on the 'Positions' tab. The Lat - Long (DMS) radio button is for coordinates in degrees, minutes and seconds. Whilst the Lat - Long (DD) radio button is for degrees in decimal format. NOTE: if the subject well is in the southern hemisphere, the Latitude value will be loaded as XXXXXX S (South). If the UTMs radio button is toggled on, the corresponding UTM Northing will be prefixed by the '-' minus symbol to designate a southern hemisphere position. NOTE: if rectangular co-ordinates (UTM) have been mistakenly used as the LATI and LONG fields in the input LIS or LAS file header, IP will not accept/load them. The user must then manually type in the surface position UTM co-ordinates and specify a 'Zone' number in the appropriate boxes, after 'checking' the 'UTMs' radio button.

Section 9.8 Well Management : Manage Well Header Info.

Well Management

Senergy

93

'Well Path' information, in terms of TVD reference curve and 'East Distance Curve' and 'North Distance Curve' from the surface location can be entered here. If the IP TVD Calculations module has been run for the well, these boxes will automatically pick up the calculated curves EDIST and NDIST, as long as the default curve names EDIST, NDIST, TVD and TVDSS are used. The user must select the TVD / TVDSS curve and 'Curve Type'. The user can choose the 'default' Well Surface Position display type (latitude/ longitude or UTM coordinates & Zone) for all wells in a database by selecting the Display type from the 'Well Options' dialog of the 'Options' module.

'Default Parameters' Tab The 'Default Parameters' tab allows the user to set values which are then used to populate modules that use these parameters/values. When loading log curves from LAS, LIS and DLIS format files, some parameters/values will be read from the file header. The parameters that are read into IP are listed under the Data Loading: LAS /LBS File input and LIS File Input sections.

Section 9.8 Well Management : Manage Well Header Info.

94

Interactive Petrophysics V3.5

Senergy

NOTE: The 'Logging Contractor' drop-down list serves an important function within IP. · Setting the 'Logging Contractor' to one of the listed companies will set up that company's Neutron/Density crossplot overlays when a crossplot from within the Porosity/ Sw module is subsequently displayed. · The choice of 'Logging Contractor' sets up the 'Neutron Tool Type' parameter for use in the 'Neutron Porosity' calculation in the Basic Log Analysis module and in the Mineral Solver module. · The 'Logging Contractor' also sets up the default Neutron Tool Look-up tables which are used to correct Limestone matrix porosities to a Sandstone or dolomite matrix and to correct for formation salinity.

'Logging' Tab The 'Logging' tab is used to store Logging Run parameter information (log attributes) and mud data for up to 25 logging runs. The List of Logging Attributes is editable and extendable and, using the 'Tools' menu ® 'Options' menu item the user can modify the attributes that can be stored in IP. If the 'Default Parameters' tab 'mud data' boxes (Rm, Rmf, Rmc, Rw and their respective temperatures) are blank, on the 'Default Parameters' tab, they can be populated directly from this form when appropriate log header information is loaded to IP.

Section 9.8 Well Management : Manage Well Header Info.

Senergy

Well Management

The 'Logging' tab is populated automatically from the data loading modules (LAS, LIS, DLIS Loaders). The user selects the logging run (column) into which to load the data from the data loader window. An example from the LAS loader screen is shown below.

Section 9.8 Well Management : Manage Well Header Info.

95

96

Interactive Petrophysics V3.5

Senergy

If a Logging parameter is currently not captured and stored within IP, the user can use the 'Tools' ® 'Options' functionality to set up a new log attribute and 'map' the external mnemonic to the IP log attribute name, so that the attribute can be saved within the IP database. See the 'Options' chapter for a full discussion of IP Well Attributes and Log Attributes.

'Plot Remarks' Tab On this tab the user has the facility to enter well specific log header remarks. These will then be used for each 'Log Plot Header' if the 'Header Remarks' is 'checked' on within the 'Plot Header' tab of the 'Plot output' module and a 'Plot Header' is selected.

Section 9.8 Well Management : Manage Well Header Info.

Well Management

Senergy

97

If the user now opens up a log plot and the 'Plot output' module, under the 'Plot Header' tab they will see the entered remarks in the 'Header Remark Text' section at the bottom of the page.

The user could add more comments to the 'Header Remarks' if required and if the user wanted the additional comments to be available to all their well plots then the user should click on the "+" button 'Add to Defaults'. This will then add the comment to the 'Plot Remarks' tab of the ' Manage Well Header Info' module. If the user does not want to use certain comments then 'uncheck' the 'Select' box next to the comment.

'Plot Annotations' Tab Log Plot annotations can be stored on a well by well basis. They can then be loaded onto log plots, as required. The 'Manage Well Header Info' 'Plot Annotations' tab allows the user to edit

Section 9.8 Well Management : Manage Well Header Info.

98

Interactive Petrophysics V3.5

Senergy

the stored well annotations. There is more information on 'Annotations' in the Log Plot Display help chapter.

Section 9.8 Well Management : Manage Well Header Info.

Well Management

Senergy

9.9

99

History Module

The 'History Module' has been developed in order that users can keep track of changes made to curves and wells within IP. The 'History Module' can be accessed via: · 'Manage Well Header Info.' module, 'General' tab. · 'Manage Log Curve Headers' module, 'History' tab.

'Manage Well Header Info' From within the 'Manage Well Header Info.' module and from the 'General' tab, there is a ' History' button. 'Clicking' on this brings up the following screen:

This is a list of relevant selected IP 'history events' that have occurred within the 'Active' well since the well's creation in the IP database. The 'history events' are listed in rows with a number of columns detailing the history. It is possible to sort, check for differences and remove 'history events' from within this module. Due to Interactive Petrophysics' complexity the 'History' module can easily attain a huge number of 'history events' very quickly. Therefore, there are numerous ways within the module of filtering the 'history event' information so that the user can quickly find the information that they require. The first layer of filtering is by using the 'Show' button. Once the user has decided to filter by well or curves then the second line of filtering can be deployed by filtering on event 'ID' or ' Event' name or 'Date' or specific 'Well/Curve_Name' or 'User_name' or 'Comments'. Plus, there is a 'Row Filter Options', which is found at the bottom of the 'History' module window. Underneath the window header are a number of buttons, 'Show', 'Delete', 'Difference', 'Run Report' and 'Parameters'. These will be described in more detail below.

Section 9.9 Well Management : History Module

100

Interactive Petrophysics V3.5

Senergy

· The 'Show' button has a drop-down menu which allows the user to 'Show All', 'Show Curves' or 'Show Wells'. · Selecting 'Show All' will show all 'history events'. · If 'Show Curves' is selected then all the curves which have had alterations made to them will be displayed. · Filtering using the 'Show Wells' will just show the events associated with the well name. · 'Delete' button allows the user to permanently remove the selected rows from the history. · The 'Difference' button only becomes active when just two event 'Type' parameter generating rows are selected (rows can be selected by 'clicking' on them and using the usual 'Shift' or 'Ctrl' keyboard buttons to select many rows or individual rows). The event 'Type' has to be the same for both the rows selected. When the 'Difference' button is clicked a program called 'ExamDiff' opens. This is a freeware visual file comparison tool.

This following screenshot shows the differences between the two selected event type 'PhiSw's.

Section 9.9 Well Management : History Module

Well Management

Senergy

101

· 'Run Report' button · 'Parameters' button displays a screen capture of the parameters set for the selected type event. NOTE: the 'Parameters' button will only be active for type events which produce parameters, such as 'PhiSw', 'Clay Vol' etc. Under the buttons are a list of column headers. Common to all the column headers is the ability to sort the rows, ascending or descending, by left mouse button 'clicking' on the column header. Further functionality of the column headings is discussed below.

Section 9.9 Well Management : History Module

102

Interactive Petrophysics V3.5

Senergy

· 'ID' column - Right mouse button 'clicking' on the 'ID' column header brings up a dialogue box where it is possible to 'Enter an Event ID number to search on'.

The event 'ID' is a means for the IP program to keep track of software events. · 'Event' column - lists all the different 'history event' types that have happened to the well. These include the running of interpretation modules, editing/depth-shifting modules, loading and saving data. To see the events by 'type', right mouse button 'clicking' on the 'Event' column header displays a list of the event 'types'. 'Click' on the 'type' to select.

Section 9.9 Well Management : History Module

Well Management

Senergy

103

· 'Date' - This column lists the date on which the 'history event' took place. Right mouse button 'clicking' on the 'Date' column header enables the user to filter the events by date. The date filter options are 'Before selected Date', 'After selected Date' and 'Between selected Dates'. The required dates can be either typed into the box or else the dropdown button allows the date to be selected from an interactive calendar.

· 'Well/Curve_Name' - This column can show curves and / or wells depending on the selection set in 'Show'. As the history module is only applicable to a single well then only one well can be selected, the 'Active' well. However, if the 'Active' well has been renamed at all then more than one well name may be displayed. This column's main use is filtering on selected curves. Set 'Show' to 'Show curves' and then right mouse button click on the 'Well/Curve_Name' column header. NOTE: the 'Row Filter Options' has to be set to 'Filter on curves only'. It is then possible to select the curve by either typing the name of the curve in the box or else using the drop-down list to select the curve from.

Section 9.9 Well Management : History Module

104

Interactive Petrophysics V3.5

Senergy

'Ticking' the 'Closest match on Well/Curve Name' will allow the user to type in a curve name and even if it doesn't match any of the available curves exactly, a curve name closely matching the entered name will be selected. · 'User_Name' - Lists the users who have had interaction with the selected IP database. · 'Comments' - These 'Comments' attempt to succinctly describe what changes have to taken place to the Well, Curve, User_Name within IP. Right mouse button clicking on the 'Column' header displays a dialogue box where it is possible to type in a text string to search for within the 'Comments' column. · 'Row Filter Options' · 'Show Row Filter' - If 'Show Row Filter' is selected then a 'Row Filter' dialogue box appears next to the 'Parameters' button. The selected 'Row Filter' is visible and user editable. Any changes to the row filter can be applied by using the 'Apply' button.

Section 9.9 Well Management : History Module

Well Management

Senergy

105

· 'Filter on curves only' · 'Filter on well only' -

'Manage Log Curve Headers' The 'History' module can also be accessed from within the 'Manage Curve Headers', 'History' tab by 'clicking' on the 'Show' button for a selected curve. The 'History' module opens with the history for the selected curve. However, the module has the same functionality as that opened up within the 'Manage Well Header Info.' module and any event can subsequently be selected by using the 'Show All' option from within 'Show'.

Section 9.9 Well Management : History Module

106

9.9.1

Interactive Petrophysics V3.5

Senergy

ExamDiff

ExamDiff This is a freeware Visual File Comparison Tool developed by PrestoSoft. The program has many features and it is beyond the scope of this Help document to list them all. However, the main icons are listed below with a brief description of their function.

- Enables user to select the two files that are to be compared. - This re-compares the selected files. - Use this icon to swap page position of the two selected files - View/Edit the first file (left hand side of page). - View/Edit the second file (right hand side of page). - Saves just the differences between the two files into a user defined file and directory. - Shows just the first file. - Shows just the second file. - Shows both files.

Section 9.9 Well Management : History Module

Well Management

Senergy

107

- Re-orientates the compared file pages so that they are either adjacent to each other or else one on top of each other. - Re-centres the 'splitter' bar. - Shows just the differences between the two files. - Moves to next difference up the page. - Moves to next difference down the page. - Current difference. - Options - Exit

Section 9.9 Well Management : History Module

108

9.10

Interactive Petrophysics V3.5

Delete Parameter Sets

See 'Delete Parameter Sets' section under the 'Parameter Sets' Chapter.

Section 9.10 Well Management : Delete Parameter Sets

Senergy

Well Management

Senergy

9.11

109

Plot Range Editor

The 'Plot Range Editor' allows the user to define, save and recall multiple depth ranges and associated vertical scales settings ('Plot Ranges'), linked to a textual description (max. 20 characters in length). A new 'Plot Range' is added to a list so that, when its' name is selected from the log plot header, the active log plot will instantly update with the display characteristics of the 'Plot Range' for the active IP well. The module will allow the user to set 'Plot Ranges' to view, for example, over different reservoir intervals, over multiple reservoirs, over cored intervals, or over a perforated interval. The 'Plot Range' is applied to the current log plot by selecting a 'Range Name' from the drop-down list on the log plot header. Two Plot Range names are automatically created by IP. These are : · '[Whole Well]' - this will display the entire well at the 'Full' vertical scale. · '[Default Range]' - this will initially also display the entire well at the 'Full' vertical scale. The user can edit the top and bottom depth entries and vertical scale to more appropriate values. IMPORTANT: Once the user has defined a [Default Range], any 'interactive' log plot, which is subsequently launched from any of the IP program interpretation modules, will automatically launch using the [Default Range] depths. NOTE: If the user extends the depth range of a well, for example, by loading log curves with a deeper 'Bottom Depth' than the initial depth set up, then the [Default Range] will have to be manually edited to extend the bottom depth to the new value. In the 'Mineral Solver' module the [Default Range] is used to initiate the interval for analysis and to set the depths for the 'Model' interval. The user should therefore define the [Default Range] before beginning an interpretation. · The square brackets '[ ]' around the 'Whole Well' and 'Default Range' plot range names indicate that these names are non-editable. · All other user-created 'Plot Ranges' are fully editable. · User-defined 'Plot Ranges' can be set up using the shortcut 'Plot Range' Icon on the right hand side of the log plot window, illustrated below. · Plot display dimensions can then be quickly changed by selecting another 'Plot Range' from the list in the Log Plot Header, as illustrated below:

Section 9.11 Well Management : Plot Range Editor

110

Interactive Petrophysics V3.5

The 'Plot Range Editor' module is accessed in any of three ways: · from the IP program main menu bar 'Well' Menu, · from the 'Log Plot Menu' on the IP program main menu bar or, · from the Header bar on a Log Plot display window.

Section 9.11 Well Management : Plot Range Editor

Senergy

Well Management

Senergy

111

The top and bottom depths for a log plot display can be changed in the 'Plot Range Editor' in a number of ways ; · by manually typing in depth values into the entry boxes, or · by pasting in depths from the IP clipboard (left mouse-button 'clicking' in a log track pastes the depth of the 'click' into the clipboard, right mouse-click in the Top Depth or Bottom Depth entry boxes, 'Paste', pastes the depth into the box, or · by selecting a 'Zone/Tops' Set and selecting Zone top and bottom depths, plus 'tolerances'. · Using a selected curve's top and bottom depths by using the 'Depth range from curve' option. Manual Depth Entries Type the Top and Bottom depth values that you would like to use to define a log plot interval, and select the vertical scale for the plot, in the editor window. Type in a 'Range Name' and 'click' the ' Apply' button. Plot Range Select from Zone/Tops Set · Use the 'Select Zone/Tops Set' button to launch a dialog window which allows you to choose an available 'Zone/Tops Set' or 'Parameter Set' from a drop-down list. Then define the shallowest and deepest Tops that you wish to view in the log plot. · The 'Tolerance' boxes allow the user to type in values, which will be added to the

Section 9.11 Well Management : Plot Range Editor

112

Interactive Petrophysics V3.5

Senergy

selected Top and Bottom Depths. In the example shown below the 'Tolerances' are set to start the log plot 100ft above the Top RN36 (-100) and end the plot 50ft below the Bottom RN12 (50). A negative 'Tolerance' value is subtracted from the associated Zone Top depth. A positive 'Tolerance' value is added to its associated Zone Top depth. · Click 'OK' to close the 'Select Plot Range' dialog. · The required 'Vertical Scale' can be selected from the drop-down list of appropriate values on the right hand side of the Plot Range Editor window. If 'None' is selected then the vertical scale for the plot range will be whatever is currently selected in the '[Whole Well]', '[Default Well]' or some other defined plot range.

Section 9.11 Well Management : Plot Range Editor

Well Management

Senergy

Section 9.11 Well Management : Plot Range Editor

113

114

Interactive Petrophysics V3.5

Senergy

· Type in a 'Range Name' into the text entry box

· If the 'Select Zones/Tops Set' functionality has been used, the 'Apply to all in-memory wells containing these explicit tops' check-box will be 'activated'. This check box, if 'checked' provides the user with a quick way to set up the same 'Plot Range' in multiple wells, if the in-memory wells contain the 'Zone/Tops Set' or ' Parameter Set' AND the wells also contain the explicit Tops names selected to define the 'Plot Range'. This would allow the user, for example, to define a 'Plot Range' over a reservoir section common to all wells in a multi-well IP Project. · When the 'Apply' Button is 'clicked', an information window will be launched, similar to that shown below, confirming how many wells have been updated with the new Plot Range.

· The 'Depth range from curve' allows users to use a curve, which they know the top and bottom depths of, to be used to define the plot range. For example, if the user only wanted to display on a plot data from a particular LWD tool run then they would select a curve from the LWD tool run and the range would reflect the top and bottom depths of that particular log run.

Section 9.11 Well Management : Plot Range Editor

Well Management

Senergy

Section 9.11 Well Management : Plot Range Editor

115

116

9.12

Interactive Petrophysics V3.5

Senergy

Take Notes

The 'Take Notes' menu item is found at the bottom of the 'Well' menu.

The 'Take Notes' option, when selected, opens a 'Notepad'-type text editor in which the user can record tips, notes and reminders regarding the well they are currently working on. The 'Notes' stays on-screen and can be accessed at any point in an interpretation, to record the users thoughts. The 'default' text file has a number of titles already entered for various IP modules. These titles can be edited and new titles added if necessary. When the user selects the 'Save' option, the text file is saved into the appropriate WELLXXXX subdirectory, in a folder called 'WellNotes'. If you change the well 'focus' in IP and select the 'Take Notes' option, IP will open the appropriate 'Notes' text editor for that particular well, if it exists, or a new, blank text file, ready for editing. The 'Notes' can be easily output to a printer.

Section 9.12 Well Management : Take Notes

Well Management

Senergy

Section 9.12 Well Management : Take Notes

117

Section

10 Curve Management

Curve Management

Senergy

10

119

Curve Management

The 'Curve Management' tools are included under the 'Well' menu. IP wells are currently able to store up to 1500 log curves, which can be organized using curve 'Sets'. Up to 50 curve Sets can be created for each IP well. It is now possible to store sets with different Step sizes and depth interval ranges including irregular sampling (very useful for when dealing with core data integration). With the addition of the flexible Sets with varying Steps certain modules will not allow data to be input unless the data is of a certain Step. Curve data in IP is stored as floating point numbers, not as integers. A curve value can have a discrete integer value but it will be saved as that value but in floating point format. For example, 1 will be stored as 1.0000000.

The following 'single well' tools are grouped under the title of 'Curve Management': · · · · · ·

'Manage Curve Sets' 'Manage Curve Headers' 'Manage Zones / Tops' 'Link Zones / Tops Sets' 'Delete Curves' 'Copy Curves from Well...'

Section 10.

Curve Management :

120

Interactive Petrophysics V3.5

Senergy

In addition, a number of 'Multi-well Curve Management' functions are found under the ' Multi-Well Options' menu item. These are: · · · ·

'Manage Multi-Well Well Header Info.' 'Manage Multi-Well Curve Sets' 'Manage Multi-Well Curve Headers' 'Manage Multi-Well Zones/Tops'

Section 10.

Curve Management :

Curve Management

Senergy

10.1

121

Manage Curve Sets

The 'Manage Curve Sets' module is used to manage the creation and deletion of 'Curve Sets'. A maximum of 50 Curve Sets can be created per well.

· To 'create' a new Set, simply type in a 'Short Name' and 'Full Name' Set name in a blank line and 'click' the 'OK' button. The 'Short Name' is limited to 8 characters and it must be unique for the well. Underscore characters can now be used in the 'Short Name'. The Full name is a label for describing the Set and can be of any length, although it is advisable to keep it short so that it can be read on the various windows that display the 'Set Full Name'. When a new 'Short Name' is entered, the 'Step' column becomes active and the user can select either to create a 'Regular' curve Set or an 'Irregular' curve Set by using the drop-down menu. The regular curve Set will use the 'Default' depth curve as its depth curve until this is changed. The irregular Set will create its own depth curve with no values in it. Once the 'Update Sets' button is 'clicked' and the Set created then the user can only change the Set step type by using the 'Edit' button. · To 'rename' a Set, simply edit its text. The Set will be renamed in the well when the 'OK' button is 'clicked'. · To 'delete' a Set, select the Set Name line you want to delete and click the 'Delete Set'

Section 10.1 Curve Management : Manage Curve Sets

122

Interactive Petrophysics V3.5

Senergy

button. This will delete the Set and all the curves contained in the Set. If the user just wants to delete selected curves then 'click' the 'View' button and a listing of all the curves contained in the Set appear in a window to the right of the 'View' button. Select the curve(s) and use the 'Delete Curve' button. · 'Add Sets from Dictionary' is an option which enables the user to create a list of Set names, both Short and Full names, and then recall the list for subsequent use in new IP databases. There are a number of 'default' names that could be used or else these could be edited/replaced with the user's own names. It is possible to make the Sets irregular step Sets by 'checking' the 'Irregular' check-box before 'clicking' the 'Add' button. The database list is kept in the users Application Data folder - C:\Documents and Settings\Username\Local Settings\Application Data\IntPetro35 as SetDictionary.xml (users Set Definitions) and SampleSet Dictionary.xml (default file of definitions).

Section 10.1 Curve Management : Manage Curve Sets

Senergy

Curve Management

Section 10.1 Curve Management : Manage Curve Sets

123

124

Interactive Petrophysics V3.5

Senergy

When the 'Add Selected Sets to Well' button is 'clicked' the highlighted Sets will be added to the 'Manage Curve Sets' screen. A warning message will appear if any of the selected Sets already exist.

Section 10.1 Curve Management : Manage Curve Sets

Senergy

Curve Management

Section 10.1 Curve Management : Manage Curve Sets

125

126

Interactive Petrophysics V3.5

Senergy

· From the 'Manage Curve Sets' window curves can also be copied or moved to other Sets. Use the 'Copy' or 'Move' radio button to select which option. Select the curve and holding down the left mouse button drag the curve across into a Set on the left hand window and release the mouse button.

· Clicking the 'Edit' button of any Set brings up the 'Well Set Depths Editor' window. From here it's possible to change the Set interval and also the step size and the units (feet or meters) plus select 'Irregular Sampling'. · The 'Well Set Depths Editor' module allows the conversion of the current well depth interval (top and bottom depths) and data sample (Step) interval. Plus there is an ' Irregular Sampling' option.

The user enters the new values on the right hand 'Change to' panel of the screen and clicks 'Run' to commit the changes. To convert a well from imperial units (ft) to metric units (m) or vice versa, change the 'units' and

Section 10.1 Curve Management : Manage Curve Sets

Senergy

Curve Management

127

'step' and leave the top and bottom depths blank. The program will calculate the new top and bottom depths in the new units. If the 'step' distance is changed, the program will automatically interpolate all curve data to produce continuous curves. NOTE : Be very careful using this module because it is very easy to lose data if the wrong depths or sample increments are entered. The user is asked to confirm the changes if any data will be lost. Once the 'Irregular Sampling' box is ticked all the other options become unavailable. The irregular sampling option means that core data or capillary pressure data is kept at the same sample step as the inputted data. Copying Data to Sets If a user copies a curve from a regular Set into an irregular Set then the following message will appear:

Here the user can either copy all the data into the irregular Set and the depths in the Set will be expanded to accommodate the data being copied or the user can just copy data points that match the depths in the irregular Set. The first option is useful for making duplicates of irregular Sets, for example a core data Set. The second option will allow for the movement of regular spaced data like log porosity into a core data Set. Loading Data into Sets When loading data into an irregular Set the program will load the data into the same depth as is in the input file if this depth exists in the irregular Set or if the input depth is less than the tolerance setting. Hence, this allows data from different files to be aligned properly in the irregular Set if the depths in the files are just slightly different. If, for example, the user has a very high sampled dataset such as permeability probe data, then the user will need to change the tolerance setting to allow this data to be loaded. Irregular Set data should be useable just like regular Set data in the crossplot and formula modules.

Section 10.1 Curve Management : Manage Curve Sets

128

Interactive Petrophysics V3.5

10.2

Senergy

Manage Curve Headers

'Manage Curve Headers' allows the user; · To view and edit the log plot display attributes of the log curves in a well and save these changes for future use. · To view the statistics of curves in a well. · To see the 'history' of log curves in an IP well (how they were loaded, what corrections/ math has been performed on them , by whom & on what date/time.) The module is activated either through the main 'Well' drop-down menu or using the speed button (

).

Log curve attributes are viewed on four separate 'tabbed' screens. The curve attributes are organized in 'grid'- type, tabular listings. The Column headings and contents of each table are described below, from left to right in each display. The 'In Name' column, which contains the Curve Name and its' curve Set name, is common to all tabs and is always the left-most column. The four tabs are: · 'General' - displays the log curve drawing attributes, like line colour, default left and right log track scales, linear or log scaling. · 'Descriptions' - user editable curve descriptions and 'aliases'. · 'Statistics' - curve statistics listings. · 'History' - curve history listings.

'General' Tab

Section 10.2 Curve Management : Manage Curve Headers

Senergy

Curve Management

129

The 'General' tab is where the user can view and edit curve display properties that will be applied any time a particular curve is added to a log plot. The IP installation directory contains a file called CPARMDEF.PAR. See 'Tools' ® 'Defaults' ® ' Edit Curve System Defaults'. This is a text file which contains a list of common log curve mnemonics and a set of 'default' display characteristics. When a log curve is loaded into the program, from ASCII, LAS/LIS/DLIS, IP searches the CPARMDEF.PAR file to see if there is an entry for each curve mnemonic in the input file. · If the mnemonic is found, IP will use the associated 'default characteristics' to fill in the display properties in the 'General' table. · If a mnemonic is not found in the CPARMDEF.PAR file, the curve scales, curve 'type', curve colour etc...will be left 'blank'. The user must then manually fill in the empty fields in the 'General' table. · If the user loads an unrecognized curve, then fills in the appropriate curve display characteristics on the 'General' tab, the curve display settings can be saved to an external file to facilitate loading the same curve mnemonic for other wells in the future. This is accomplished by using the right-mouse-button functionality in the 'In Name' column, described below. · 'In Name' : This column lists the curve name that was originally used when the curve was loaded to IP. Where a curve has been loaded to a curve Set, other than the 'Default' Set, the curve name is prefixed by the 'Short Set Name', as shown in the window above. By 'clicking' the mouse cursor on a curve name in the 'In Name' column the user is given the following options : · 'Add Curve Type to file'. This copies the Curve 'type' (see below) to the user defaults file, UserCurveType.OPT (See 'Tools' ® 'Defaults'). · 'Add Curve Properties to file' copies the user-defined curve display attributes to the User-Defined Curve defaults file, CPARMDEF_USER.PAR (See 'Tools ® Defaults). IP uses the IP program file CPARMDEF.PAR and the user-defined file CPARMDEF_USER.PAR to save curve attributes to. If a CPARMDEF_USER.PAR file contains the same curve mnemonic as the CPARMDEF.PAR file but, for example, has a different curve colour entry for that common curve, when that curve is loaded into IP from an external file, the CPARMDEF_USER.PAR settings take preference.

· 'Out Name' : To rename a curve, click in the 'Out Name' cell and type in the new curve name. · To delete a curve from the 'Manage Log Curve Headers' interface, 'blank out' the text in the 'Out Name' box. The curve will be deleted when you click the '

Section 10.2 Curve Management : Manage Curve Headers

130

Interactive Petrophysics V3.5

Senergy

Update' button. · 'Units' : Type in curve units of measurement. · 'Curve Type' : The 'Curve Type' attribute is used by various modules to choose default curves. For example, when the user launches the 'Clay Volume' interpretation module, some of the input curve boxes will be automatically filled in with the appropriate gamma ray log or sonic log curve name if these curves exist in the subject well, because the curves have recognized 'Curve Types'. 'Curve Types' are assigned when a curve is loaded into the program. 'Curve Types' are stored in the CPARMDEF.PAR file in the same data line as each curve mnemonic. On the 'General' tab a drop-down box allows the user to set the 'Type' from the standard list. The standard types are defined in a user-editable file 'CurveType.opt' which is found in the IP program directory. To add a default type, edit this file with a text editor (Notepad) and add the new 'Type' to the list. See 'Tools' ® 'Defaults'.

· 'Curve Set' : The 'Curve Set' attribute allows the user to assign the Set that a curve belongs to. A drop-down box allows the selection of available Sets. To create a new Set click on the 'Edit Sets' button at the top of the window. This will launch the 'Manage Curve Sets' dialog. · 'Lock' : the lock column allows a curve to be flagged as 'locked', so that its values cannot be accidentally changed. A 'tick' in this column will indicate the curve is locked. By clicking the 'Lock All' or 'UnLock All' button one can lock and unlock all curves in the well at the same time. This can also be achieved by 'clicking' on the 'Lock' column

Section 10.2 Curve Management : Manage Curve Headers

Curve Management

Senergy

131

header. The 'Set Lock' button can be used to set the 'Lock' column flag depending on the curves currently displayed in the active well.

· 'Left Scale', 'Right Scale', 'Log/Lin', 'Color' : These are default settings that will be used to set up the display parameters for each curve when it is selected for a log plot. · 'Shift Inc' : This parameter is used to make a total 'block depth shift' to a curve (in depth step increments). A user can manually enter values or the 'Interactive Block Depth Shift' module sets it. To apply one shift increment to all the curves listed, enter a value into the top 'Shift Inc' cell and 'click' on the 'Shift Inc' column header this will then populate the entered value into all the 'Shift Inc' column cells. To make a shift of 10 feet to a curve with a data spacing of 2 samples per foot, a value of 20 would be entered. A positive value (e.g. 20) will shift a curve downhole. A negative value (e.g. -20) will shift a curve uphole. NOTE: it isn't now possible to use the 'Shift Inc' column to depth shift irregular curve Set data. The column will be grayed out over the irregular curves and a warning message will appear if the user attempts to depth-shift the curves using the 'Shift Inc' column.

· 'Final' : This is a 'flag' that can be set to indicate that this is the final version of a curve. This can be used to select curves for output (see LAS Write) and is also used to preferentially select one curve over another, when curves are being selected by 'Curve Type'. Click in the column to set the Flag. The 'Set Final' button will set all the curves that are currently being displayed in the active Log Plot display as 'Final' curves. This can be very useful for quickly selecting the curves to output in digital form. When logs are loaded, their default attributes are looked up in a file called CPARMDEF.PAR ( CparmDef_metric.par for the metric option), which is stored in the IP program directory. This file can be edited by the user to change or add new curves or defaults parameters. It contains the defaults for Crossplot and Histogram scales, as well as the log plotting scales. The file can be opened and edited by selecting the menu item 'Tools' ® Edit Curve System defaults'.

'Descriptions' Tab

Section 10.2 Curve Management : Manage Curve Headers

132

Interactive Petrophysics V3.5

Senergy

This tab allows the user to include comments associated with a curve and to set up curve 'Alias' names for use on 'hardcopy' log headers. · 'Comments' Field : User-entered comments about a curve. · 'Alias' Field : An 'Alias' name can be optionally used for the Hardcopy log output. Rather than using the IP curve ('In Name') names in the log headers the Alias name can be displayed, allowing more generic names to be used. · 'Description' : Description of the curve. The curve description can be optionally output in a Log Plot header when it is plotted. The default text strings are set in the CPARMDEF.PAR file. Every time a curve is created the file is 'checked' to see if a default description exists for the curve and, if a description is found, it is loaded into this field.

'Statistics' Tab This is a non-editable tab which gives basic information about the curves in a well.

Section 10.2 Curve Management : Manage Curve Headers

Senergy

Curve Management

133

· 'Array Size' : This column will contain the array size for an array-type curve. For a non-array curve the cell will be empty. An array size of '12 x 60' would indicate 12 'X' value samples and 60 'Z' value depth increments. Therefore an array curve of this size would contain 720 data values per 1 normal curve data value. An example of Array curve Statistics is illustrated below, showing Borehole Televiewer (FMS) curves:

· 'Minimum', 'Maximum', 'Mean', 'Std. Dev.' : This gives the minimum value, maximum value, mean / average value and the standard deviation of the values for the curves. This average ignores Null (-999) data values. · 'Top Depth', 'Bot. Depth' : The top and bottom depths for a curve are the first and last 'non-Null' values. · 'Net Interval' : The net interval for a curve will be the number of 'non-Null' data values multiplied by the database step interval. Hence, if a curve has continuous data from top to bottom of a well then the net interval will be one database step more than the bottom minus top depth.

Section 10.2 Curve Management : Manage Curve Headers

134

Interactive Petrophysics V3.5

Senergy

'History' Tab

· 'Show Parameters' : This displays the history for the curve. More details can be found in the 'History Module'. · 'Create Module' : This displays the module name that created the curve. · 'Create date' : This is the date the curve was created. The format of the displayed date is set by the users default regional settings, set in the Windows control panel. · 'Create User' : This is the user name (computer logon name) of the person who created the curve. For databases created prior to version 3.0 this will be blank. · 'Update Module' : This shows the module name that last changed the curve. · 'Update date' : Time the module was last updated. · 'Update User' : This is the user name (computer logon name) of the person who last changed the curve. All fields in the tables are editable, except the original input name ('In Name') and the data within the 'Curve Statistics' tab. The listing 'Sort Order' can be changed from the drop-down menu list or by clicking in the curve column header. If the 'Reverse Sort' box is 'checked' then the sort order will be reversed.

Section 10.2 Curve Management : Manage Curve Headers

Curve Management

Senergy

135

'Manage Log Curve Headers' Buttons The 'control' buttons along the bottom of the window are described below. · The 'Update' button - When the 'Update' button is 'clicked', any changes made to curve names, curve types or curve display parameters will be saved. · The 'Cancel' button - If 'Cancel' is 'clicked', no changes are made to the curve listings. · The 'Print' button - When the 'Print' button is 'clicked' the following pop-up menu is displayed, which allows the 'Curve History' data to be output to the printer, clipboard or to a file.

Curve Selection by Type Many of the IP calculation and interpretation modules select curves by 'Curve Type'. If multiple curves have the same 'type' then the curve selected will be the most recently-modified curve of the correct 'type' with the 'Final' flag set. If no 'Final' flags are set, the selected curve will be the most recently modified curve of the correct 'type'.

Section 10.2 Curve Management : Manage Curve Headers

136

Interactive Petrophysics V3.5

10.3

Senergy

Manage Zones / Tops

The 'Manage Zones / Tops' module allows the user to manage Zones and Tops Sets. It has been enhanced in order to help with the 'Link Zones / Top Sets' module. The functionality includes: · · · · · · · · ·

Creating a New Zone / Tops set Creating a TVDSS Top set Setting Zone colours Copying any set type to a Tops set type Copying Sets Editing a Zone / Tops Set Editing a Parameter Set Deleting Sets Multi-Well Zone / Tops Sets

A 'Zone/ Tops' Set consists of a group of depth-delimited intervals. Each zone has a 'Name', a ' Top Depth' and a 'Bottom Depth' entry. Zones also have their default zone colours assigned by the IP program. The zone colours are user-editable. 'Parameter' Sets, which are used in the interpretation modules, are 'extended' Zone Sets in which each zone has a set of parameters (eg. Rw, Rmf, RhoClay etc) associated with it, in addition to 'Name', 'Top Depth' and 'Bottom Depth '. Zone / Parameter Sets have a 'Type' associated with them. These relate to the interpretation module used to create the parameters. Possible 'types' are: Tops :

Источник: https://pdfcoffee.com/ip-help-manual-v35-pdf-free.html
ExamDiff full version patch

ExamDiff 1.9 Free Download Activator is a slim, lightweight software tool to load and compare two different versions of the same document, or two related documents, to see where changes were made. It is a good tool for both students and teachers to review the changes that have been made to a document.

Pros

Quickly compares files for review: Whether you’re checking for the first time or comparing files that have been updated a handful of times, ExamDiff full version with keygen download will quickly check for differences and display them for you in a visual format that, while not cutting edge in terms of graphics, is very effective in laying out key differences.

ExamDiff Full Version Free Download

ExamDiff Full Version serial code helps you compare files and displays the differences ExamDiff serial code is a handy software application that you can use to compare the contents between two files to find out if they're identical. It features several options that can be quickly figured out.

Simple setup and interface

Installing this tool is a fast and easy job that shouldn't impose any difficulties. As soon as it's launched, it asks you to locate the two files you want to compare using a file browser. Evidently, both files must have the same extension to be taken into account. If they're not text documents, the program shows their binary code instead.

As a software or website developer, there will come a time when you might require a tool to help you compare files that contain code lines. A solution to this issue comes from ExamDiff 1.9 full version, a handy visual comparing tool that highlights all the differences between two text files. You will be able to compare large files, character by character, and locate all dissimilarities between the two selected documents within seconds. It’s an easy and time-saving solution when it comes to comparing and synchronizing two text files. The application will give you access to a search tool that will help you find code lines a lot easier. Adding to that, you can adjust the highlights color palette the way you like, change the font, enable notifications and many other. The biggest drawback of using ExamDiff 1.9 with crack is that you won’t be able to edit the content of the compared files directly on the program’s interface. This feature is available only for the Pro version. To be straight, I’ve found ExamDiff 1.9 patch to be very effective and I was more than happy with its performance, but I would only recommend it to professional developers, as its interface might seem a bit hard to handle to beginner users.

Features.

  • You can change highlights differences
  • The interface is hard to handle
  • Comes with a built-in search engine
  • Supports drag-and-drop action
  • Accurate file comparison
  • No Cons!
  • Just Thank you, I want to donate you
  • I am packaging a driver for XP embedded. In the install directory there are 3 .inf files. Differencing quickly and clearly told me which is the required one.
  • Excellent in providing comparisons between .doc files. I particularly like the was in the case of identical files you get a message saying so and the option to quit immediately.
  • Good
ExamDiff Activation Key

Configure program settings

It's possible to ignore all whitespace, changes in amount of whitespace, cases, leading and trailing whitespace in lines, treat both files as texts, hide line numbers, modify the tab and margin sizes, customize colors for added, deleted and changed lines when it comes to the background and text, and indicate another external text editor.

Evaluation and conclusion

We haven't come across any stability issues in our tests, thanks to the fact that the utility didn't hang, crash or display error messages. Its impact on the overall performance of the machine was barely noticeable, since it needed low CPU and RAM to work properly. No recent updates have been made, though. Otherwise, ExamDiff For Windows 10 Download proves to be a reliable application for comparing two files, particularly if they're text documents.

System Requirement:

What’s new in last version:

New features:
Ability to set negative command line options for /i, /w, /b, /l, /e, /t, and /d
Windows 7 support
Improvements:
Improved messages for identical or binary files
Improved multi-monitor support
Bug fixes:
Ability to display long (greater than 2048 characters) lines
Autopick feature in Compare dialog that remembers matching file pairs
View/Edit command accessible via the context menu
Separate Copy and Copy With Padding Lines commands
Windows Vista support
Improved current difference marker
New: File names in the caption
New: True-color toolbar
Bug fix: Clicking the ExamDiff status bar always opened ExamDiff Pro web page

ExamDiff 1.9 Full Version Registration Code, ExamDiff 1.8 Full Crack, ExamDiff 1.7 Full Version Serial Key, ExamDiff 1.6m full version serial keys

Best text editor for windows 95Binary compare toolCompareCompare dialogComparisonComparison of two files softwareComparison toolDiff doc open source codeDiff tool for freeDownload ExamDiffExamDiffExamDiff free downloadExamdiff free executableИсточник: https://radiodevices.info/examdiff/
ExamDiff Pro Master Edition 1010.0.1.16 Patch Activation

ExamDiff Pro Master Edition 1010.0.1.16 Download

ExamDiff Pro Master Edition 1010.0.1.16 Patch Activation

ExamDiff Pro Master Edition 1010.0.1.16 Download is a Windows tool for visual text and binary file and folder. You can easily edit and synchronize files either using the built-in editor, or an external text editor of your choice.

It compares files and directories with equal ease, and boasts one of the fastest comparison algorithms of any tool today. It features a double-pane view that allows for side-by-side comparisons, with color-coded lines indicating whether each line is added, deleted, or changed.For folder comparisons, just double-click a file to jump to a side-by-side file comparison. By accessing the ‘Navigation’ menu, you are able to go to the next detected difference in the current line, or simply remove all the available bookmarks. Create software with stunning UIs and native performance, which runs just about everywhere without rewriting. ExamDiff Pro Master Edition Activation. Qt for Device Creation Pre-Built Software StackYou can write and recycle Qt application and device UI code to run on all major embedded operating systems, including RTOS.

ExamDiff Pro Master Edition 1010.0.1.16 Patch Activation

ExamDiff Pro Master Edition 1010.0.1.16 Download Features

  • A must have tool for all power Windows users.
  • None I can think of.
  • ———-
  • I can’t think of any.
  • Very clear, compatibility with mouse wheel, flexible in the configuration, allows extremely large files to compare…
  • I always recommend it to my colleagues.
  • Clear interfaceGreat matching algorithms – very few major mismatches except when unavoidableAllows on-the-fly file editing
  • There is NOTHING i don’t like about this product!
  • Support is amagingly good.
    I’ve received a real reply with 1/2 hour of sending a query.
  • Good tool, resonable price, excelent support.
    What else do you need !
  • I can’t think of any!
  • comparison algorithm is good, mark difference up to characters, have plug-in to sort files before comparing, etc.
  • Extremely useful, lightweight, and easy to use.

ExamDiff Pro Master Edition Serial

NameSpecification
CategoryProgramming
Downloads1K
User Rating8/10   (6 votes)
DeveloperPrestoSoft: http://www.prestosoft.com/
LicenseSerial Key
LanguageMulti-language
OsWindows 98/Me/2000/XP/2003/Vista/Server 2008/7/8
Version10.0.1.18
Updated09/05/2019

ExamDiff Pro Master Edition 1010.0.1.16 Key Video Preview

How To Crack ExamDiff Pro Master Edition Activation:

  • Uninstall the previous version with IObit Uninstaller
  • Download and extract files
  • Install software
  • Close the program in case of startup
  • Copy the provided DLL into the folder where you installed the product
  • To enjoy!

Links for ExamDiff Pro Master Edition 1010.0.1.16 Code:

ExamDiff Pro Master Edition 1010.0.1.16 Patch Activation

Related

Источник: https://keyscrack.com/programming/examdiff-pro-master-edition-1010-0-1-16-patch-activation/

Источник: https://waddee.wordpress.com/

: Prestosoft - Activators Patch

BURNINTEST PROFESSIONAL 9.1 BUILD 1003 CRACK + LICENSE KEY FREE 2020
DIRECTX 12 CRACK + SERIAL KEY FREE DOWNLOAD 2021
Prestosoft - Activators Patch

watch the video

Advanced Patching

Code Compare Pro v.4.2





Advertisement

Description

Code Compare is a powerful file and folder merge tool that demonstrates a new level of code comparison. Code Compare is the tool specially adapted for comparing source code files. It locates changes in code with regard to its structure. Code Compare features 3-way file merge tool that allows resolving version control merge conflicts.

Key features:
* Text Comparison and Merging:
*Colored blocks for inserted, deleted, and.
Read more


  • Developer:Devart
  • Trial length:30 Day Trial
  • Downloads:308
  • Size:10.63 Mb
  • Price:$49.95

To free download a trial version of Code Compare Pro, click here
To buy software Code Compare Pro, click here
To visit developer homepage of Code Compare Pro, click here

Download NowBuy Now


Advertisement


Versions History
VersionDate ReleasedRelease Notes
4.222.08.2017Visual Studio 2017 Preview version 15.3 is supported
4.0002.04.2014- Automatic File Merging - Product Registration with License Keys - Improved Three-Way Merge - New UI Themes in Standalone Code Compare
3.128.10.2013*VS 2013 is supported *Atmel Studio 6.1 is supported * The application behaviour inside Visual Studio is improved *Update messages are more user-friendly now
3.0014.05.2013* Increased Application Startup Speed * Improved Text Comparison Interface * Supported XML Structure Comparison * Improved Folder Comparison * Improved Comparison Options Setup * Improved General Application Management * Added Atmel Studio Integration
Screen Shot

Click on a thumbnail for the larger image.

Code Compare Pro
System Requirements

Code Compare Pro requires Win2000, WinXP, Win7 x32, Win7 x64, Windows 8, Windows 10, WinServer, WinOther, Windows2000, Windows2003, Windows Server 2000, Windows Server 2003, Windows Server 2008, Windows Server 2008r2, Windows Server 2012, Windows Tablet PC Edition 2005, Windows Media Center Edition 2005, WinVista, Windows Vista Starter, Windows Vista Home Basic, Windows Vista Home Premium, Windows Vista Business, Windows Vista Enterprise, Windows Vista Ultimate, WinVista x64, Windows Vista Home Basic x64, Windows Vista Home Premium x64, Windows Vista Business x64, Windows Vista Enterprise x64, Windows Vista Ultimate x64.

Code Compare Pro v.4.2 Copyright

Shareware Junction periodically updates pricing and software information of Code Compare Pro v.4.2 full version from the publisher using pad file and submit from users. Software piracy is theft, Using crack, password, serial numbers, registration codes, key generators, cd key, hacks is illegal and prevent future development of Code Compare Pro v.4.2 Edition. Download links are directly from our publisher sites. Links Code Compare Pro v.4.2 from Bittorrent, mediafire.com, uploadfiles.com, hotfiles.com rapidshare.com, megaupload.com, netload.in, storage.to, depositfiles.com and other files hosting are not allowed. The download file is obtained directly from the publisher, not from any Peer to Peer file sharing applications such as Shareaza, Limewire, Kazaa, Imesh, eDonkey, eMule, Ares, BearShare, Overnet, Morpheus, BitTorrent Azureus and WinMX.

Review This Software


More Code Compare Pro Software


Advertisement

Code Compare Pro  v.4.2

CodeCompare is the tool specially adapted for comparing source code files. It locates changes in code with regard to its structure and allows resolving version control merge conflicts.

VBA Code Compare

VBA CodeCompare allows you to compare and merge any Visual Basic code embedded into a VBA project (macros, sheet code, module code etc.). This tool uses direct access for working with VB modules. Thus, you don't have to export the source code to a file

Code Counter Pro  v.1.3.2.12

The Code Counter Pro software is the easiest to use, flexible, and fastest source code counter program for Windows that can count several types (over 20 pre-defined!) of text or source files and report them to you in a quick summary.

Code Signer Pro  v.1 3

Code Signer Pro by CATIII Software. Cost-effective solution for developers and firms who need to code sign files quickly and efficiently. Features an attractive GUI, PVK2PFX wizard and drag 'n' drop batch capability. 30 day unlimited trial.

Apeel PHP Code Generator Pro (MySQL Edition)  v.11 2

When you need a PHP Data-Entry Web Application for your MySQL database and time is at a premium but you don't want to compromise on modern "Desktop-Like" features then it's time to try out Apeel PHP Code Generator Pro. It's a RAD (Rapid Application

CodeCompare  v.5.1

CodeCompare is a free powerful tool designed to compare and merge differing files prestosoft - Activators Patch folders. It can be used as a Visual Studio add-in and as a standalone application. It contains folder synchronization and CodeCompare options customization.

Pro QR Code  v.1.0.0.0

The most professional QR Code scanner. Pro QR Code is a multi-format barcode scanner that supports scanning QR Code. You can prestosoft - Activators Patch Pro QR Code to access text, web links, telephone, contacts, email, sms. Features: 1. You can save the scanned results

Compare and Merge  v.2 3

Compare and Merge is a visual file and source codecompare utility. It lets you see the differences between text files, and makes it easy to resolve these differences.

ExamDiff Pro

ExamDiff Pro is a Windows tool for visual text and binary file and folder. It features a double-pane view that allows for side-by-side comparisons, with color-coded lines indicating whether each line is added, prestosoft - Activators Patch, or changed. For folder comparisons,

SmartBear AQtime Pro  v.7.30.537.86

AQtime Pro is an award-winning performance profiling and memory and resource debugging toolset for 32- and 64-bit Windows. NET and Java applications as well as VBScript and JScript code.

SQL Data Compare  v.9.0.0.117

SQL Data Compare can compare and synchronize data between two Microsoft SQL Server databases or backups of databases. You may select all or a subset of tables and views to synchronize.

Other products of this developer Devart

beyond compare tool CodeCompare  v.5.1

Code Compare is a free powerful tool designed to.nization and Code Compare options customization.

Источник: http://code-compare-pro.sharewarejunction.com/
ExamDiff full version patch

ExamDiff 1.9 Free Download Activator is a slim, lightweight software tool express vpn download - Crack Key For U load and compare two different versions of the same document, or two related documents, to see where changes were made. It is a good tool for both students and teachers to review the changes that have been made to a document.

Pros

Quickly compares files for review: Whether you’re checking for the first time or comparing files that have been updated a handful of times, ExamDiff full version with keygen download will prestosoft - Activators Patch check for differences and display them for you in a visual format that, while not cutting edge in terms of graphics, is very effective in laying out key differences.

ExamDiff Full Version Free Download

ExamDiff Full Version serial code helps you compare files and displays the differences ExamDiff serial code is a handy software application that you can use to compare the contents between two files to find out if they're identical. It features several options that can be quickly figured out.

Simple setup and interface

Installing this tool is a fast and easy job that shouldn't impose any difficulties. As soon as it's launched, it asks you to locate the two files you want to compare using a file browser. Evidently, both files must have the same extension to be taken into account. If they're not text documents, the program shows their binary code instead.

As a software or website developer, there will come a time when you might require a tool to help you compare files that contain code lines. A solution to this issue comes from ExamDiff 1.9 full version, a handy visual comparing tool that highlights all the differences between two text files. You will be able to compare large files, character by character, and locate all dissimilarities between the two selected documents within seconds. It’s an easy and time-saving solution when it comes to comparing and synchronizing two text files. The application will give you access to a search tool that will help you find code lines a lot easier. Adding to that, you can adjust the highlights color palette the way you like, change the font, enable notifications and many other. The biggest drawback of using ExamDiff 1.9 with crack is that you won’t be able to edit the content of the compared files directly on the program’s interface. This feature is available only for the Pro version. To be straight, I’ve found ExamDiff 1.9 patch to be very effective and I was more than happy with its performance, but I would only recommend it to professional developers, as its interface might seem a bit hard to handle to beginner users.

Features.

  • You can change highlights differences
  • The interface is hard to handle
  • Comes with a built-in search engine
  • Supports drag-and-drop action
  • Accurate file comparison
  • No Cons!
  • Just Thank you, I want to prestosoft - Activators Patch you
  • I am packaging a driver for XP embedded. In the install directory there are 3 .inf files. Differencing quickly and clearly told me which is the required one.
  • Excellent in providing comparisons between .doc files. I particularly like the was in the case of identical files you get a message saying so and the option to quit immediately.
  • Good
ExamDiff Activation Key

Configure program settings

It's possible to ignore all whitespace, changes in amount of whitespace, cases, leading and trailing whitespace in lines, treat both files as texts, hide line numbers, modify the tab and margin sizes, customize colors for added, deleted and changed lines when it comes to the background and text, and indicate another external text editor.

Evaluation and conclusion

We haven't come across any stability issues in our tests, thanks to the fact that the utility didn't hang, crash or display error messages. Its impact on the overall performance of the machine was barely noticeable, since it needed low CPU and RAM to work properly. No recent updates have been made, though. Otherwise, ExamDiff For Windows 10 Download proves to be a reliable application for comparing two files, particularly if they're text documents.

System Requirement:

What’s new in last version:

New features:
Ability to set negative command line options for /i, /w, /b, /l, /e, /t, and /d
Windows 7 support
Improvements:
Improved messages for identical or binary files
Improved multi-monitor support
Bug fixes:
Ability to display long (greater than 2048 characters) lines
Autopick feature in Compare dialog that remembers matching file pairs
View/Edit command accessible via the context menu
Separate Copy and Copy With Padding Lines commands
Windows Vista support
Improved current difference marker
New: File names in the caption
New: True-color toolbar
Bug fix: Clicking the ExamDiff status bar always opened ExamDiff Pro web page

ExamDiff 1.9 Full Version Registration Code, ExamDiff 1.8 Full Crack, ExamDiff 1.7 Full Version Serial Key, ExamDiff 1.6m full version serial keys

Best text editor for windows 95Binary compare toolCompareCompare dialogComparisonComparison of two files softwareComparison toolDiff doc open source codeDiff tool for freeDownload ExamDiffExamDiffExamDiff free downloadExamdiff free executableИсточник: https://radiodevices.info/examdiff/

ExamDiff Pro 9.0.1.6 Crack Master Edition & Keygen Full Version Download [LATEST]

ExamDiff Pro Crack Master Edition is the latest an advanced powerful yet easy-to-use file and folder comparison tool. This software offers user-friendly and more efficient way to compare files and folders. ExamDiff Pro Master Edition is commercial software utility for visual file and directory comparison, for Microsoft Windows. Developers develop this software with latest features prestosoft - Activators Patch tools that let you to easily compare files and folders. Many professional users are using this reliable comparison tool.

ExamDiff Pro 9.0.1.6 Crack Master Edition & Keygen Download

ExamDiff Pro Registration Code Full Version Free has dual pane view that permits side-by-side comparisons, with color-coded line numbers indicating whether each line is added, deleted, or changed. ExamDiff Pro Keygen also include ability to compare text and binary files, and directories in one click. If you want to use this software ExamDiff Pro Master Edition simply download it from download links and use it easily.

Information about ExamDiff Pro Crack:

ExamDiff Pro 9.0.1.6 License Key is a powerful yet intuitive and very easy to use visual file and directory comparison tool for Windows. It features unique functionality that distinguishes ExamDiff Pro Latest Version from other comparison programs. If you’ve been irritated with other comparison utilities, you will find that ExamDiff Pro Crack offers a Bandicam 4.6.4.1727 Crack more efficient and user-friendly way to compare files and folders.

Now a days many files and folders comparison software are available on internet but ExamDiff Pro 9.0.1.6 Full Keygen is the fastest and reliable among them. It’s very easy to use. If you are not expert to use this software no matter. Simply follow the instructions of developer of this software or watch the demo after you will be able to use it. Working functionality of ExamDiff Pro Crack incl Keygen is better as related to f.lux 4.75 License Key - Crack Key For U file and folder comparison software.

ExamDiff Pro Crack Master Edition Full Version Download

Benefits to use ExamDiff Pro Master 9.0.1.6 Crack:

  • Accurately compare executable files with binary comparison.
  • Perform 2-way and 3-way diff and merge (Master Edition only).
  • Using built-in Shell extension compare from Windows Explorer.
  • Using built-in plug-ins compare a local website to an FTP server.
  • With the help of syntax highlighting visualize your code structure.
  • Compare Word, Excel, and PDF documents using built-in plug-ins.
  • Speedily undo mistakes by comparing files with previous versions.
  • Easily perform code reviews and share diff reports with your colleagues.
  • Synchronize files and folders between your computer and external media.
  • You have ability to create directory snapshots for future comparison and archiving.

ExamDiff Pro Crack Latest Full Version Free Download

Main ExamDiff Pro Key Features:

  • XML support
  • Word wrapping
  • Plug-in support
  • Unicode support
  • Syntax highlighting
  • Fuzzy line matching
  • Drag and drop support
  • Manual synchronization
  • Extensive command line interface
  • UNIX, HTML, and printed diff reports
  • Simple and regular expression search
  • Ability to recognize moved text blocks
  • File editing within file comparison panes
  • Shell integration in 32-bit and 64-bit Windows
  • Comparison of text files, binary files, and directories
  • Creation of directory snapshots for later comparison
  • Ability to ignore capitalization, white space, and comments
  • Difference highlighting to the level of lines, words or characters.
  • Support for copying, renaming, and deleting files or directories.

ExamDiff Pro Master Edition incl Full Keygen Download

How to install ExamDiff Pro Crack Master Edition?

  1. Download complete setup from download links.
  2. Install ExamDiff Pro Crack on your pc.
  3. After Install Don’t Launch/Run Application.
  4. Copy content from crack folder and paste & replace into installation directory
  5. Launch ExamDiff Pro 9.0.1.6 Crack Version.
  6. That’s All, Enjoy.

Supported Operating System:

  • Windows 10
  • Windows 8.1
  • Windows 8
  • Windows 7
  • Windows XP
  • Windows Vista

ExamDiff Pro Crack Master Edition incl Keygen Full Version Latest Free Download from links given below…

Link 1

OR

Official WEB

Источник: http://pcfullversion.com/examdiff-pro-crack/

Источник: https://waddee.wordpress.com/

HOW TO SPEED ​​UP MOZILLA FIREFOX

Teaching at one of the Triamudomsuksa School’s in Thailand…. am I a failure?

Well the day has finally arrived and the results of management’s assessment decision about whether or not to continue employing me has arrived. My name is not on the list that is ungraciously stuck to the notice board on a wall. Not one Thai teaching officer or any one from management discussed anything with me and no one actually did a classroom observation of my teaching methods, classroom management or saw my many students laughing and enjoying my lessons this whole year….yes… 1 year…. Oh if you ask them they will deny and bullshit with the best of them, this is what they are really good at, and please don’t get me started about all the promises they made to me and how many they actually kept!

Yes, I am hurting inside mainly because I truly cared for the students, many of the teacher’s I never really got to know because of their lack of English abilities……which brings me to my next gripe.

How can Thai teachers who fail their core subject examination which the Thai ministry of education administers, be allowed to continue teaching their subjects to students? This was a whole department including the manager! (English Department)

Surely they must be qualified at the correct level of education so they are capable of teaching it correctly, after all we foreign teachers must now complete a teaching license and do a Thai cultural course just to satisfy the Thai ministry of education’s criteria… I guess one rule for us and one rule for them springs to mind.

At this particular school we have teachers without the correct level or ability or even foreign teachers who do not have degrees, and the school was notified about this but continues to use them saying that they have verified the foreigner’s qualifications. It is all bullshit!… I know because one foreign teacher told me before he left that his qualification was fake and bought from a paper mill in Bangkok, Thailand.

I apologize for the profanity, but I see the corruption and the deceit from the management in this school and know that I can do nothing against this regime, they are powerful and have pushed me out as well as other valuable teachers whose main concern are the students, after all, they are the future of Thailand! …or aren’t they?

  • Teachers have taken scholarship money away from students who have won competitions and are unable to speak out about this atrocity.
  • Students actually sign away their rights to the money which the government provides for their education.
  • Money used on a building which was inferior due to cheap building materials and collapsed, (Thankfully during the night and no one hurt). I have photographic evidence of this and I reported this to one of the management officers.
  • A teacher with inadequate understanding of English wrote a “Health Education” examination for the Mini English Program that was over 90% incorrect and this examination’s content was never checked by any of the native speakers. Native speaking teachers were shown this examination and upon seeing the amount of errors contained in it told me that the examination should be stopped. I highlighted many of the mistakes and took this examination to my boss who is responsible for the MEP program and has a PhD said, (quote “Do not stop the exam, students must do exam”-end quote) I could not help the students who asked me during this examination what everything meant….yes, it was that bad and yes, I do have an example of this examination which by the way is also signed by the Director of the school which prestosoft - Activators Patch the lack of concern with anything to do about English, it seems that no one wants to take the time to read it or organize someone to make sure there are no mistakes.(Very slap dash to say the least!).
  • A new Vice director who is second in charge of this school spends their time basically patrolling the school like a techtool pro 12 - Activators Patch guard. Is not allowed to know any accounting or budget requirements about the school. When this Vice director tries to make a positive suggestion for improving the school, the management humiliates them.
  • This person even nikon camera control pro 2 product key mac nikon camera control app the other members on the management team that they were not doing their jobs correctly due to errors, this Vice director is now shunned by the management at this school and their job has become a living hell for them….they too do not have a voice or a say and they just sign documents and not to even read them!!! Shocking!….absolutely disgusting in my opinion.
  • This same Vice director is not informed about some of the school activities and made to look like a very unprofessional idiot by this management.
  • This is also true about the foreign teachers who are also not informed about activities and expected to read the Thai teachers minds to find out anything.

I intend to keep adding to this list as prestosoft - Activators Patch information comes to light and I will also be allowing comments from teachers and students from this school and from the public, please be reminded that the content that will appear on this web blog/website is not all my work or thoughts and some of the comments if derogatory or inflammatory are associated with the entity that has written them. I will do my best to moderate the people who post and leave their comments as I do not want to offend anyone or imply anything that is not true. If I have evidence and documents substantiating mine or other party’s comments then these will be available to the public or anyone from the Thai ministry of Education should they want to take formal action on the management at this school.

Hopefully someone from the ministry of education in Thailand will comment and want to know more about the many statements and other people’s comments, it’s about time these managers should be held accountable and criminal proceedings to take place if found guilty. It only takes one person to make a stand. Never forget that there is power in numbers, the more of you that complain and say something it will eventually be heard.

It is time that the students had a voice and a real say in their own education, after all everyone has a voice and it’s against the law to prevent us from telling the truth!

This school’s director even stopped the students from telling the truth on its website forum when he read comments from students complaining about teachers behavior and teaching methods. Why could he not talk to everyone concerned perhaps he decided that it was too much effort, or just doesn’t care?

Needless to say this is one of the main problems at the school, lack of communication.

I have just been informed by an English native speaking teacher that we have a meeting at 3pm today 22/02/2011. If he never spoke to me I would have never known about it, I guess lack of communication still persists. Not even my boss has had the decency to speak to me for a whole semester when she speaks to the MEP students and walks right past my glass cage you call a room! She also insists that she is sincere and wants all her teachers to be the same as her! God forbid!

Update about the meeting…….it was all bullshit again…….but this time I actually did something…. I recorded some of it…….I am really pleased too…….because I have actually got my boss……a vice director actually discussing with the other Thai teachers in Thai about a student and his family and it is very bad indeed. I have made nova launcher prime apk download - Free Activators and I decided this time to take some action as this is a student that has learning difficulties and no one cares about it. I have let the parents listen to this recording and they were so embarrassed, shocked more like it….I told them please try to put your child into another school, no one cares about him like I do.

Result: They listened to me and this student will now be in a better learning environment.

This is my bitch for today…….actually, for the semester.

Like this:

LikeLoading.

Posted inThe bitching page

ExamDiff Pro Master Edition 1010.0.1.16 Patch Activation

ExamDiff Pro Master Edition 1010.0.1.16 Download

ExamDiff Pro Master Edition 1010.0.1.16 Patch Activation

ExamDiff Pro Master Edition 1010.0.1.16 Download is a Windows tool for visual text and binary file and folder. You can easily edit and synchronize files either using the built-in editor, or an external text editor of your choice.

It compares files and directories with equal ease, and boasts one of the fastest comparison algorithms of any tool today. It features a double-pane view that allows for side-by-side comparisons, with color-coded lines indicating whether each line is added, deleted, or changed.For folder comparisons, just double-click a file to jump to a side-by-side file comparison. By accessing the ‘Navigation’ menu, you are able to go to the next detected difference in the current line, or simply remove all the available bookmarks. Create software with stunning UIs and native performance, which runs just about everywhere without rewriting. ExamDiff Pro Master Edition Activation. Qt for Device Creation Pre-Built Software StackYou can write and recycle Qt application and device UI code to run on all major embedded operating systems, including RTOS.

ExamDiff Pro Master Edition 1010.0.1.16 Patch Activation

ExamDiff Pro Master Edition 1010.0.1.16 Download Features

  • A must have tool for all power Windows users.
  • None I can think of.
  • ———-
  • I can’t think of any.
  • Very clear, compatibility with mouse wheel, flexible in the configuration, allows extremely large files to compare…
  • I always recommend it to my colleagues.
  • Clear interfaceGreat matching algorithms – very few major mismatches except when unavoidableAllows on-the-fly file editing
  • There is NOTHING i don’t like about this product!
  • Support is amagingly good.
    I’ve received a real reply with 1/2 hour of sending a query.
  • Good tool, resonable price, excelent support.
    What else do you need !
  • I can’t think of any!
  • comparison algorithm is good, mark difference up to characters, have plug-in to sort files before comparing, etc.
  • Extremely useful, lightweight, and easy to use.

ExamDiff Pro Master Edition Serial

NameSpecification
CategoryProgramming
Downloads1K
User Rating8/10   (6 votes)
DeveloperPrestoSoft: http://www.prestosoft.com/
LicenseSerial Key
LanguageMulti-language
OsWindows 98/Me/2000/XP/2003/Vista/Server 2008/7/8
Version10.0.1.18
Updated09/05/2019

ExamDiff Pro Master Edition 1010.0.1.16 Key Video Preview

How To Crack ExamDiff Pro Master Edition Activation:

  • Uninstall the previous version with IObit Uninstaller
  • Download and extract files
  • Install software
  • Close the program in case of startup
  • Copy the provided DLL into the folder where you installed the product
  • To enjoy!

Links for ExamDiff Pro Master Edition 1010.0.1.16 Code:

ExamDiff Pro Master Edition 1010.0.1.16 Patch Activation

Related

Источник: https://keyscrack.com/programming/examdiff-pro-master-edition-1010-0-1-16-patch-activation/
ExamDiff Pro Master Edition 11.0.1.8 Cracked Latest Activation

ExamDiff Pro Master Edition 11.0.1.8 Free Patch Cracked

ExamDiff Pro Master Edition 11.0.1.8 Cracked Latest Activation

If you have been frustrated with other comparison utilities, you will find that ExamDiff Pro offers a much more efficient and user-friendly way to compare files and folders. It compares files and directories with equal ease, and boasts one of the fastest comparison algorithms of any tool today.

Clean Master free is one of the best cleaner apps available in the market. The app comes with a variety of features, and if users want more, they can easily upgrade to the pro version. Apart from providing access in various languages, the tool improves the speed of your PC and cleans unwanted files quickly. Get data from TheTvDB.com, TheMovieDB.org, Imdb.com. ExamDiff Pro Master Edition Code. ExamDiff Pro features a double-pane view that allows for side-by-side comparisons, with customizable color-coding indicating whether each line is added, deleted, or changed. ExamDiff Pro Master Edition Crack is a handy software application that you can use to compare the contents between two files to find out if they’re identical. It features several options that can be quickly figured out.

ExamDiff Pro Master Edition 11.0.1.8 Cracked Latest Activation

ExamDiff Pro Master Edition 11.0.1.8 2019 Download Features

  • Automatically detects file changes and prompts the user to re-compare files.
  • One push re-compare function which attempts to leave the prestosoft - Activators Patch focus in the same place as before the re-compare.
  • Drag and drop support for dropping one or two files into the program's window (e.g. from windows explorer).
  • Saves the file differences in a standard unix diff file.
  • Allows the copying of text from the comparison panes via drag and drop, a hot key, or a right button pop up.

ExamDiff Pro Master Edition 11.0.1.8 2019 Download

NameSpecification
CategoryProgramming
Downloads14,031
User Rating3.8/5
DeveloperPrestoSoft: http://www.prestosoft.com/
LicenseSerial Key
LanguageMulti-language
OsWindows 98/Me/2000/XP/2003/Vista/Server 2008/7/8
Version11.0.1.8
Updated06/04/2015

ExamDiff Pro Master Edition 11.0.1.8 Crack Video Preview

Changelog for ExamDiff Pro Master Edition 11.0.1.8 Key:

  • Enhanced display of ratings
  • Added action to re
  • fetch IMDB ratings
  • Set “Disable SSL certificate verification” to true per default to avoid connection problems
  • Cleanup of changed artwork etensions
  • Show language names in UI language
  • Added more rating providers to the settings
  • Re
  • added file size to the media files table
  • Preserve epbookmark tag in episode NFOs
  • Reworked the new indicator to use less space
  • Rebuild image cache when changing data source
  • Writing/cleanup of downloaded subtitle files

How To Crack ExamDiff Pro Master Edition 11.0.1.8 Patch:

  • First of all, take the trial version of Lightworks.
  • Install and run the program.
  • Now turn off your system security.
  • Download the crack from the link below.
  • Unzip the file and run it.
  • When done RSTART light works.
  • God
  • Don\’t worry it completely safe now you can turn o your system security.

Links for ExamDiff Pro Master Edition Crack:

ExamDiff Pro Master Edition 11.0.1.8 Cracked Latest Activation

Related

Источник: https://keyscrack.com/file-managers/examdiff-pro-master-edition-11-0-1-8-cracked-latest-activation/

Notice: Undefined variable: z_bot in /sites/healthplum.us/activators-patch/prestosoft-activators-patch.php on line 115

Notice: Undefined variable: z_empty in /sites/healthplum.us/activators-patch/prestosoft-activators-patch.php on line 115

0 Replies to “Prestosoft - Activators Patch”

Leave a Reply

Your email address will not be published. Required fields are marked *